We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Grey plastic DIN rail power supply, rectangular, vented sides, terminal blocks front, Schneider Electric branding

Schneider Electric

Schneider Electric ABL8RPS24100 24V 240W DIN Rail Power Supply

SKU CH-WVPR-ZWPF1

DIN-rail 24 V DC supply delivers 240 W with 10 A continuous and 15 A peak output

  • Delivers 240 W continuous power from a 24 V DC output
  • Wide 100–500 V AC input range suits global installations
  • Compact 5.27 × 5.51 × 3.35 in plastic case fits tight DIN-rail space
  • Low ≤ 200 mV output noise protects sensitive control circuits
  • 15 A peak current handles motor inrush without tripping

Industrial DIN-Rail Power Supply

The Schneider Electric ABL8RPS24100 is a 240 W switching power supply designed for DIN-rail mounting in control cabinets. It accepts a wide AC input range of 100 to 120 V and 200 to 500 V at 50 to 60 Hz single-phase. The unit delivers a regulated 24 V DC output at 10 A continuous current within an IP20-rated plastic enclosure measuring 5.27 in high, 5.51 in wide and 3.35 in deep. It suits automation panels that need reliable 24 V power in a compact form factor.

Replacing Older Linear or Lower-Capacity Units

Installations migrating from linear supplies or earlier switch-mode models rated below 240 W gain headroom for additional I/O modules, sensors or actuators. The step up is justified when the load approaches or exceeds 10 A continuous, or when the wider 200 to 500 V AC input range simplifies wiring across sites with different mains voltages. Panels that stay well under 10 A and operate on a single fixed mains voltage may not require the extra capacity.

Sustained Load Behaviour

Under continuous 10 A operation the switching topology maintains output noise at or below 200 mV. Hold-up time exceeds 120 ms at 400 V AC, 40 ms at 240 V AC and 20 ms at 100 V AC, giving the control system a predictable ride-through window during brief mains interruptions. Peak current capability reaches 15 A for short-duration inrush events without tripping the internal protection. Thermal performance remains stable inside the enclosed plastic case when mounted on a DIN rail with adequate cabinet ventilation.

Highlights

  • Delivers 240 W continuous power from a 24 V DC output
  • Wide 100–500 V AC input range suits global installations
  • Compact 5.27 × 5.51 × 3.35 in plastic case fits tight DIN-rail space
  • Low ≤ 200 mV output noise protects sensitive control circuits
  • 15 A peak current handles motor inrush without tripping

Specifications

BrandSCHNEIDER ELECTRIC

Questions about this item

Will the 5.51 in width fit on a standard 35 mm DIN rail?

Yes, the unit is designed for DIN rail mounting and its 5.51 in width aligns with standard rail spacing.

How do I wire the 100 to 120V AC and 200 to 500V AC inputs correctly?

Connect the supply voltage to the designated input terminals matching your source; the unit auto-ranges across both bands.

When should I plan to replace the internal electrolytic capacitors?

Capacitor life depends on load and ambient temperature; monitor output ripple and schedule replacement if noise exceeds 200mV.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.