We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Schneider Electric 9001KYK33 30 mm three-button control station, zinc enclosure, black and red push buttons

Schneider Electric

Schneider Electric 9001KYK33 30 mm 3-Button Control Station

SKU CH-B997-PXRWS

A 30 mm three-button control station with momentary push buttons in black and red, rated 10 A at 600 V AC and IP66 in a zinc enclosure

  • Engine BrandSCHNEIDER ELECTRIC
  • Engine Size30 mm
  • Three momentary push buttons for immediate control
  • NEMA 1, 3, 4, 13 and IP66 rated for harsh environments
  • 10 A at 600 V AC and 2.5 A at 24 V DC contact rating
  • Zinc enclosure with 3/4 in NPT hub for secure wall mounting
  • Legend marked Open, Close, Stop for clear operator identification

Three-button control station

The Schneider Electric 9001KYK33 is a 30 mm industrial control station built for wall mounting. It provides three momentary push buttons labelled Open, Close and Stop in a zinc enclosure rated NEMA 1, 3, 4, 13 and IP66. The unit suits machine panels that need basic start-stop-direction control in wet or dusty environments.

NEMA and IP limits

The enclosure meets NEMA 1, 3, 4 and 13 plus IP66, so it resists falling dirt, rain, sleet, hose-directed water and oil or coolant seepage. It is not rated for submersion, corrosive atmospheres or hazardous locations beyond those NEMA types. Installers must ensure conduit entries and gaskets maintain the declared protection.

10 A AC contact rating

Each button carries a 10 A @ 600 V AC and 2.5 A @ 24 V DC rating under the A600/Q600 designation. Circuits that exceed these values need a separate contactor or relay; the station alone cannot switch higher loads. Verify the application current before specifying this unit.

Highlights

  • Three momentary push buttons for immediate control
  • NEMA 1, 3, 4, 13 and IP66 rated for harsh environments
  • 10 A at 600 V AC and 2.5 A at 24 V DC contact rating
  • Zinc enclosure with 3/4 in NPT hub for secure wall mounting
  • Legend marked Open, Close, Stop for clear operator identification

Specifications

Engine BrandSCHNEIDER ELECTRIC
Engine Size30 mm

Questions about this item

Which 9001KYK33 control station should I choose for a three-function wall panel?

This model provides three momentary push buttons labelled Open, Close and Stop in a single 30 mm zinc enclosure with a 3/4 in NPT hub, so one unit covers all three functions.

What does the 10 A contact rating mean when the station is wired into a 600 V AC circuit?

Each of the three buttons carries a 3NO/3NC contact block rated 10 A at 600 V AC, allowing direct switching of motor starters or contactors at that voltage.

How does the NEMA 1, 3, 4, 13 and IP66 rating limit where I can mount the station?

The enclosure is rated for indoor and outdoor use, resisting falling dirt, rain, splashing water, hose-directed water and oil or coolant seepage, so it suits wash-down and exposed locations.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.