We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray zinc wall-mounted control station, two black 30 mm momentary push buttons, 3/4 in NPT hub

Schneider Electric

Schneider Electric 9001KYK25 30 mm 2NO/2NC Push Button Station

SKU CH-01BD-06K7N

A 30 mm push-button control station with two momentary operators, 2NO/2NC contacts rated 10A at 600V AC, IP66 zinc enclosure, and 3/4 in NPT hub

  • Engine BrandSCHNEIDER ELECTRIC
  • Engine Size30 mm
  • Momentary push-button action for precise control
  • Dual 1NO/1NC contacts rated 10A at 600V AC
  • IP66 zinc enclosure resists dust and water jets
  • NEMA 1, 3, 4, 13 ratings suit indoor and outdoor use
  • Compact 30 mm operators fit standard panel cut-outs

30 mm Push Button Station

The Schneider Electric 9001KYK25 is a wall-mount control station with two momentary push buttons in a zinc enclosure. It provides 2NO/2NC contacts rated 10A at 600V AC and 2.5A at 24V DC for industrial machinery control.

Sustained Load Behaviour

The contacts carry a NEMA A600/Q600 designation for continuous duty at the stated ratings. An IP66 enclosure protects the mechanism from dust and powerful water jets during prolonged operation.

Installation and Common Issues

The station mounts on a wall and accepts a 3/4 in NPT hub for conduit entry. Wiring must match the 1NO/1NC contact form per operator; mismatched connections are the typical cause of control faults.

Highlights

  • Momentary push-button action for precise control
  • Dual 1NO/1NC contacts rated 10A at 600V AC
  • IP66 zinc enclosure resists dust and water jets
  • NEMA 1, 3, 4, 13 ratings suit indoor and outdoor use
  • Compact 30 mm operators fit standard panel cut-outs

Specifications

Engine BrandSCHNEIDER ELECTRIC
Engine Size30 mm

Questions about this item

Does the 9001KYK25 generate noticeable heat or noise when the 10 A contacts run continuously?

The push-button station has no internal power supply or fan, so it produces no heat or audible noise; only the switched load creates warmth.

What external wiring and mounting hardware must I provide for the 3/4 in NPT hub?

You need conduit or cable glands that fit a 3/4 in NPT thread, plus conductors rated for 10 A at 600 V AC or 2.5 A at 24 V DC.

Will the IP66 zinc enclosure and A600/Q600 contacts work reliably with older relay logic cabinets?

Yes, the NEMA 1, 3, 4, 13 rating and standard contact designation match legacy industrial control panels.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.