We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray zinc enclosure with black 30 mm selector switch Off/On

Schneider Electric

Schneider Electric 9001KYK110 Selector Switch Control Station 30 mm 1NO/1NC Off/On

SKU CH-0QAY-PNVGM

A 30 mm selector switch control station with maintained Off/On action, 1NO/1NC contacts rated 10A at 600V AC and 2.5A at 24V DC, IP66 zinc enclosure, NEMA 1, 3, 4, 13, 3/4 in NPT hub

  • Engine BrandSCHNEIDER ELECTRIC
  • Engine Size30 mm
  • Maintained selector action gives clear Off/On control
  • 1NO/1NC contact form handles 10 A at 600 V AC
  • IP66 zinc enclosure resists dust and water ingress
  • 30 mm operator fits standard industrial panel cut-outs
  • Wall-mount design with 3/4 in NPT hub simplifies installation

Selector Switch Control Station 30 mm

The Schneider Electric 9001KYK110 is a maintained-action selector switch with a single black operator and 1NO/1NC contact form. It carries an Off/On legend and fits 30 mm panel cut-outs. The zinc enclosure is rated NEMA 1, 3, 4, 13 and IP66 for indoor and outdoor industrial use. Wall mounting uses a 3/4 in NPT hub.

Verify panel cut-out and circuit rating

Confirm the mounting surface accepts a 30 mm hole and that the enclosure depth of 4 in clears internal obstacles. The contact rating is 10A at 600V AC and 2.5A at 24V DC under NEMA A600/Q600 designation. Ensure your control circuit voltage and current stay within these limits. The unit ships without pilot lights.

Replaces worn selector switches in motor-starter

This station upgrades older maintained switches that lack IP66 sealing or NEMA 13 oil-tight rating. The jump is worth it when the existing enclosure shows corrosion or when contact reliability drops below 10A at 600V AC. It does not suit applications requiring momentary action or multiple operators in a single housing.

Highlights

  • Maintained selector action gives clear Off/On control
  • 1NO/1NC contact form handles 10 A at 600 V AC
  • IP66 zinc enclosure resists dust and water ingress
  • 30 mm operator fits standard industrial panel cut-outs
  • Wall-mount design with 3/4 in NPT hub simplifies installation

Specifications

Engine BrandSCHNEIDER ELECTRIC
Engine Size30 mm

Questions about this item

Does the 9001KYK110 control station ship complete or must I buy the selector operator separately?

The unit arrives fully assembled with a black 30 mm selector switch, 1NO/1NC contact block and gray zinc enclosure rated NEMA 1, 3, 4, 13 and IP66.

How do I decide between the maintained Off/On action and a momentary version for this 30 mm station?

The maintained action holds the selected position until turned again, which suits simple on/off machine control; momentary versions are not offered for this model.

What does the 10 A at 600 V AC rating mean when the switch is wired into a motor starter circuit?

The A600/Q600 contact designation confirms the 1NO/1NC block can carry 10 A at 600 V AC or 2.5 A at 24 V DC for pilot-duty loads.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.