We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Schneider Electric 30 mm blue LED lamp module, screw terminals, plastic housing

Schneider Electric

Schneider Electric 9001KM38LL 30mm 120V Blue LED Lamp Module

SKU CH-RRSR-GMHEA

A 30 mm blue LED lamp module for 120 V AC/DC circuits with screw-clamp terminals and IP20 protection

  • Engine BrandSCHNEIDER ELECTRIC
  • Engine Size30 mm
  • Blue LED visibility in industrial panels
  • 120 V AC/DC operation suits control circuits
  • 30 mm size fits standard cut-outs
  • Screw-clamp terminals speed up wiring
  • NEMA 1 2 3 4 4X 12 13 and IP20 rated protection

Schneider Electric 9001KM38LL 30mm Blue LED Lamp

This Schneider Electric lamp module is a 30mm diameter LED indicator designed for 120V AC/DC control circuits. It features a blue lens and screw-clamp terminals for secure wiring in industrial panels. The unit carries NEMA 1, 2, 3, 4, 4X, 12, 13 and IP20 ratings for protected environments. It serves as a direct replacement for part number 65088-052-13.

Suits panels needing a 30mm blue 120V LED indicator

This module fits operators who need a blue 120V AC/DC pilot light with screw terminals and NEMA 4X or IP20 ingress protection. It is not for circuits operating at voltages other than 120V AC/DC. It does not suit applications requiring a different lens colour or a smaller mounting diameter. Buyers needing integrated legends or multi-colour status should look elsewhere.

30mm mounting diameter decides fit

The single specification that determines compatibility is the 30mm panel cut-out size. If the enclosure or pushbutton station uses a standard 30mm opening, this module installs directly. A different cut-out dimension makes the part unusable without an adapter, which is not supplied. Verify the panel drilling before ordering.

Highlights

  • Blue LED visibility in industrial panels
  • 120 V AC/DC operation suits control circuits
  • 30 mm size fits standard cut-outs
  • Screw-clamp terminals speed up wiring
  • NEMA 1 2 3 4 4X 12 13 and IP20 rated protection

Specifications

Engine BrandSCHNEIDER ELECTRIC
Engine Size30 mm

Questions about this item

How do I wire the screw-clamp terminals on this 120 V blue LED module, and what mistake do installers make?

Strip each conductor to the recommended length, insert fully into the screw-clamp openings, and tighten the screws securely; the common error is leaving strands loose or under-tightened, which creates a high-resistance joint on the 120 V AC/DC circuit.

What part will need replacing down the road, and how do I identify it?

The LED lamp itself is the replaceable item; order manufacturer number 65088-052-13 when the blue indication dims or fails.

At what point does the NEMA 4X / IP20 rating become the limiting factor during continuous operation?

The IP20 rating limits use to indoor enclosures; sustained exposure to water jets or dust ingress beyond the NEMA 4X enclosure seal will compromise the module first.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.