We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Schneider Electric 30 mm metal joystick operator, two-position, chromium-plated bezel

Schneider Electric

Schneider Electric 9001K31H8 30 mm Metal Joystick Operator, 2 Position

SKU CH-70RH-0TVM9

30 mm metal joystick operator with two positions, momentary action, 10 A at 250 V AC contacts and IP66 protection

  • Engine BrandSCHNEIDER ELECTRIC
  • Engine Size30 mm
  • 30 mm metal joystick fits standard industrial panels
  • Two-position momentary action gives precise directional control
  • 10 A at 250 V AC rating handles demanding circuits
  • IP66 and NEMA 1, 12, 13, 2, 3, 3R, 4 sealing resists dust and water
  • RoHS, REACH and WEEE compliant for regulated markets

Industrial Joystick Operator 30 mm

The Schneider Electric 9001K31H8 is a 30 mm metal joystick operator built for industrial control panels. It provides two momentary positions with horizontal operation and a non-latching action. The unit carries NEMA ratings 1, 2, 3, 3R, 4, 12, 13 and an IP66 rating for dust and water ingress protection. It suits operators who need a rugged manual interface for machinery.

Contact Rating Limits 10A 250V AC

The contacts are rated at 10A at 250V AC with NEMA designations A600 and Q600. This defines the maximum switching capacity for resistive and inductive loads. The device uses a 2NC contact form, so both circuits open when the joystick is actuated. Buyers who need normally open contacts or higher current capacity must select a different operator.

Metal Construction Chromium Plated Bezel

The joystick body and bezel are metal with a chromium plated finish for corrosion resistance. A 30 mm mounting hole is required for panel installation. The momentary, non-latching action returns to centre automatically when released. Buyers who require a maintained position or a larger mounting footprint will need an alternative model.

Highlights

  • 30 mm metal joystick fits standard industrial panels
  • Two-position momentary action gives precise directional control
  • 10 A at 250 V AC rating handles demanding circuits
  • IP66 and NEMA 1, 12, 13, 2, 3, 3R, 4 sealing resists dust and water
  • RoHS, REACH and WEEE compliant for regulated markets

Specifications

Engine BrandSCHNEIDER ELECTRIC
Engine Size30 mm

Questions about this item

Should I choose the 30 mm metal version or a different size for my panel?

This operator is a 30 mm metal joystick with a chromium-plated bezel, designed for a standard 30 mm panel cutout.

What does the 10 A contact rating mean when the joystick is wired into my control circuit?

Each of the two NC contacts can switch up to 10 A at 250 V AC, matching the A600/Q600 NEMA designation for heavy-duty pilot duty.

How does the IP66 and NEMA 4/13 rating limit where I can mount this joystick?

The IP66 and NEMA 1, 2, 3, 3R, 4, 12, 13 ratings mean the operator is dust-tight and protected against powerful water jets, making it suitable for wash-down and outdoor industrial environments.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.