Rust-Oleum
Rust-Oleum Stops Rust Protective Enamel Gloss White 1 qt 7792502
Oil-based gloss white enamel protects indoor and outdoor surfaces with 120 sq ft coverage per quart and 24-hour recoat time
- Selling UnitEach
- Durable corrosion resistance protects metal surfaces indoors and out
- Gloss white finish refreshes furniture and décor with lasting beauty
- Oil-based formula covers up to 120 sq ft per quart
- Recoat after 24 hours for efficient project completion
- Clean up with mineral spirits or xylene for easy maintenance
Rust-Oleum Stops Rust Gloss White 1 qt
Rust-Oleum Stops Rust Protective Enamel in Gloss White is a solvent-based paint for indoor and outdoor use. It suits multi-purpose surfaces such as furniture and décor. The 1 qt container covers approximately 120 sq ft. Buyers who need a water-based formula or a larger volume should look elsewhere.
Sustained protection and recoat timing
The oil-based enamel delivers corrosion-resistant durability rated for one year. Full cure requires 24 hr before the coating reaches its final hardness. A second coat also needs 24 hr before application. Surfaces exposed to constant moisture or UV may show limits not covered by the one-year rating.
Build quality and daily handling
The gloss sheen provides a smooth, reflective finish that resists mild abrasion. Clean-up requires mineral spirits or xylene, so keep solvents on hand during application. The 485 g/L VOC level means strong odour and the need for good ventilation. Mildew resistance is not included, so damp areas may need additional treatment.
Highlights
- Durable corrosion resistance protects metal surfaces indoors and out
- Gloss white finish refreshes furniture and décor with lasting beauty
- Oil-based formula covers up to 120 sq ft per quart
- Recoat after 24 hours for efficient project completion
- Clean up with mineral spirits or xylene for easy maintenance
Specifications
| Brand | RUST-OLEUM |
|---|---|
| Selling Unit | Each |
Questions about this item
How much heat or fumes does the 485 g/L VOC enamel release when brushed on all day?
The oil-based formula emits 485 g/L VOC, so expect noticeable solvent odour during application; ventilate the area and allow 24 hours for full cure before heavy use.
What cleaner do I already need to have on hand for brushes and spills?
Clean-up requires mineral spirits or xylene; keep a container ready before you start painting.
Will the gloss white coat bond to the old alkyd trim I plan to keep?
Yes — the multi-purpose enamel adheres to properly prepared alkyd surfaces; sand, clean with mineral spirits, then apply and allow 24 hours before recoating.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



