We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rust-Oleum one gallon Dunes Tan high-gloss epoxy floor coating can

Rust-Oleum

Rust-Oleum S6571413 1 gal Floor Coating Dunes Tan High Gloss Solvent

SKU CH-FXG9-NY4VS

One-gallon solvent-based epoxy floor coating in Dunes Tan with a high-gloss finish, covering 100 to 300 square feet and ready for light traffic in 10 hours

  • TypeTraffic & Parking Lot
  • High-gloss finish resists wear in heavy traffic areas
  • Dunes Tan colour provides a clean, professional appearance
  • Solvent-based epoxy cures for light traffic in 10 hours
  • Covers 100 to 300 sq ft per gallon for efficient application
  • USDA-accepted formulation suitable for interior and exterior concrete

High-Gloss Epoxy Floor Coating

This solvent-based epoxy coating provides a durable high-gloss finish in a Dunes Tan colour. It is designed for interior and exterior concrete surfaces such as garage floors, warehouses and parking areas. The product is USDA acceptable and meets VOC requirements of less than 100g/L.

Coverage And Recoat Windows

One gallon covers between 100 and 300 square feet depending on surface porosity and application thickness. Light traffic is possible after 10 hours, while a full cure for heavy use requires 48 to 72 hours. A recoat window of 10 to 24 hours allows multi-coat builds without mechanical abrasion.

Application Temperature And Activator

The coating must be applied between 60 and 90 degrees Fahrenheit using a roller. It requires the 6500 epoxy floor coating activator to cure properly; without this specific activator the resin will not cross-link. California Proposition 65 warnings apply for cancer and reproductive harm.

Highlights

  • High-gloss finish resists wear in heavy traffic areas
  • Dunes Tan colour provides a clean, professional appearance
  • Solvent-based epoxy cures for light traffic in 10 hours
  • Covers 100 to 300 sq ft per gallon for efficient application
  • USDA-accepted formulation suitable for interior and exterior concrete

Specifications

BrandRust-Oleum
TypeTraffic & Parking Lot

Questions about this item

Will the Dunes Tan epoxy bond to the existing concrete sealer I already have down?

The product is a polyamine converted epoxy resin designed for concrete; test a small patch first to confirm adhesion before coating the full 100 to 300 sq ft coverage area.

How do I know the 6500 activator has cured to the high-gloss finish shown on the can?

After 48 to 72 hours at 60 to 90 °F the surface should be hard, uniformly glossy, and accept light traffic at 10 hours if the mix ratio was followed.

Does the 1-gallon can include the 6500 epoxy floor coating activator or must I buy it separately?

The can contains only the solvent-base Dunes Tan coating; the 6500 activator is sold separately and is required for the two-part system to cure.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.