Rust-Oleum
Rust-Oleum 245218 Hammered Spray Paint Brown 12 oz
Brown hammered spray paint and primer covers 10 to 15 sq ft on metal, wood and aluminium, tack-free in 30 min and recoatable in 1 to 48 hr
- TypeNULL
- Hammered finish hides surface flaws on metal, wood and aluminium
- Paint and primer in one coat cuts prep time
- Tack-free in 30 minutes and ready for recoat in 1 to 48 hours
- Covers 10 to 15 square feet per 12 oz can
- Applies in temperatures from 50 to 90 degrees Fahrenheit
Product Identity
Rust-Oleum 245218 Hammered Spray Paint delivers a brown hammered finish in a 12 oz solvent-based alkyd can. It functions as both paint and primer for interior or exterior use on aluminum, metal, and wood surfaces. The product is new and restricted from sale in California due to Proposition 65 chemical warnings for cancer and reproductive harm.
Application Characteristics
The hammered texture creates a distinctive dimpled appearance that helps mask surface imperfections on metal, wood, or aluminum. Coverage ranges from 10 to 15 square feet per can depending on substrate porosity and application technique. Dry times are tack-free at 30 minutes, recoat window spans 1 to 48 hours, and full dry occurs at 1 hour under recommended conditions.
Environmental Constraints
Application temperature must stay between 50 and 90 degrees Fahrenheit for proper film formation and adhesion. The solvent-based alkyd resin requires adequate ventilation during use and cannot be shipped to California addresses. Buyers needing water-based cleanup, low-VOC formulas, or compliance with California regulations should seek alternative products.
Highlights
- Hammered finish hides surface flaws on metal, wood and aluminium
- Paint and primer in one coat cuts prep time
- Tack-free in 30 minutes and ready for recoat in 1 to 48 hours
- Covers 10 to 15 square feet per 12 oz can
- Applies in temperatures from 50 to 90 degrees Fahrenheit
Specifications
| Brand | Rust-Oleum |
|---|---|
| Type | NULL |
Questions about this item
How often will I need to apply another coat once the 12 oz can is empty?
The can covers 10 to 15 square feet, so plan to buy a new can when you exceed that area.
At what temperature does the spray stop curing properly during a long job?
Application temperature must stay between 50 and 90 degrees F; outside that range the finish will not dry correctly.
Will the fumes or heat build up if I spray continuously for hours?
It is solvent based and carries a California Proposition 65 warning for cancer and reproductive harm, so ventilate the area and take breaks.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



