We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver stainless steel tube bender with long handles and curved forming die for half inch tubing

Ridgid

Ridgid 608 1/2" Tube Bender

SKU CH-MWK6-A51RA

Heavy-duty instrument bender forms 90 to 180 degree bends in 1/2 inch stainless steel or titanium tube with a 1-1/2 inch radius

  • Bends stainless and titanium tubing cleanly
  • Handles 90 to 180 degree angles precisely
  • Heavy-duty construction withstands repeated use
  • 1-1/2 inch radius prevents tube collapse
  • Model 608 rated for 1/2 inch capacity

Ridgid 608 1/2" Tube Bender

The Ridgid 608 is a heavy-duty instrument bender built for shaping stainless steel and titanium tubing up to 1/2 inch in diameter. It suits technicians and fabricators who need accurate bends in corrosion-resistant alloys without hydraulic equipment.

1/2 inch capacity with 1-1/2 inch bending radius

The tool forms bends from 90 to 180 degrees on 1/2 inch tubing using a fixed 1-1/2 inch radius. This single specification determines whether the bender matches the tube size and minimum bend radius required by the job.

Sustained use on stainless steel and titanium

Harder alloys such as stainless steel and titanium demand greater force per bend than softer metals. The heavy-duty construction absorbs that load repeatedly, keeping the radius consistent across multiple 90 to 180 degree bends without the deformation seen on lighter models.

Highlights

  • Bends stainless and titanium tubing cleanly
  • Handles 90 to 180 degree angles precisely
  • Heavy-duty construction withstands repeated use
  • 1-1/2 inch radius prevents tube collapse
  • Model 608 rated for 1/2 inch capacity

Specifications

BrandRidgid

Questions about this item

What tube sizes can the 1/2 inch capacity bender actually handle in a workshop?

The Ridgid 608 bends 1/2 inch outer-diameter stainless steel or titanium tube and pipe.

Does the 1-1/2 inch bending radius limit how tight a 90 degree turn can be?

Yes, every 90 to 180 degree bend follows a fixed 1-1/2 inch centre-line radius, so tighter corners are not possible with this tool.

How is the Ridgid 608 secured while making a bend?

The heavy-duty frame is designed to be held in a bench vice or clamped to a workbench for stable leverage during bending.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.