We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
RICOMART Sn63/Pb37 solder paste syringe, flux bottle and desoldering wick spool

RICOMART Sn63/Pb37 Solder Paste 30G & Desoldering Wick Kit

SKU CH-V64P-ZVA81

Kit combines 30 g Sn63/Pb37 solder paste, no-clean flux and 10 ft of 0.1 in desoldering wick for PCB rework

  • Compatibility/FitmentDsw-flux-kit, Desoldering Wick And Soldering Flux Kit
  • Sn63/Pb37 alloy melts at lower temperature for easier soldering
  • 30 g syringe provides enough paste for multiple SMD jobs
  • 10 ft of 0.1" wick removes solder quickly from PCB pads
  • No-clean flux leaves minimal residue so boards need less cleaning
  • Rosin-based flux breaks down oxide layers for stronger joints

Solder Paste & Desoldering Kit

The RICOMART Sn63/Pb37 kit bundles 30G of solder paste with 10Ft of 0.1" desoldering wick and 10cc of no-clean flux. It is aimed at hobbyists and technicians who repair PCBs, through-hole parts and surface-mount devices in a single workflow.

Suits bench rework and prototyping

Builders who need a complete removal and reflow set for occasional board repair will find the flux, paste and wick matched for the task. Buyers who want more storage volume or a dedicated rework station should look at something else.

30G paste with 10Ft wick coverage

The paste quantity handles multiple SMD and through-hole joints while the 10Ft roll of 0.1" wick clears several desoldering sessions. Large production runs or heavy multi-layer boards will run out of both consumables quickly.

Highlights

  • Sn63/Pb37 alloy melts at lower temperature for easier soldering
  • 30 g syringe provides enough paste for multiple SMD jobs
  • 10 ft of 0.1" wick removes solder quickly from PCB pads
  • No-clean flux leaves minimal residue so boards need less cleaning
  • Rosin-based flux breaks down oxide layers for stronger joints

Specifications

Compatibility/FitmentDsw-flux-kit, Desoldering Wick And Soldering Flux Kit

Questions about this item

Do I need a separate soldering iron to use the Sn63/Pb37 solder paste?

Yes, a soldering iron or hot-air station is required to heat the paste to reflow temperature.

Will the 0.1" desoldering wick work on older through-hole joints?

The 0.1" wide wick covers through-hole pads and surface-mount leads, absorbing solder from both styles.

How can I confirm the no-clean flux is inactive after the job?

The flux leaves only a small, clear residue that does not require cleaning, indicating it has deactivated.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.