We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Richelieu 192 mm cabinet pull in honey bronze finish with beaded sides and clean edges

RICHELIEU

RICHELIEU BP8795192HBRZ 192 mm Honey Bronze pull

SKU CH-8ZNN-AKA8F

A 192 mm centre-to-centre cabinet pull with beaded edges in honey bronze, supplied with 8/32 mounting screws

  • TypeCabinet & Drawer Hardware
  • Transitional design elevates cabinetry style
  • Clean edges and beaded sides create visual impact
  • 192 mm centre-to-centre fits standard drilling
  • Included 8/32 screws enable quick installation
  • Honey Bronze finish adds warm metallic tone

Cabinet pull with Honey Bronze finish

The RICHELIEU BP8795192HBRZ is a cabinet and drawer pull designed for residential and light-commercial joinery. Its 192 mm centre-to-centre spacing suits standard door and drawer layouts. The Honey Bronze tone provides a warm metallic accent that fits both traditional and transitional interiors.

Installation hardware and Proposition 65 notice

Mounting screws sized 8/32 are supplied in the pack so no separate fastener purchase is required. The product carries California Proposition 65 warnings for chemicals linked to cancer and reproductive harm. No power draw, thermal output or acoustic emissions are associated with this passive hardware item.

192 mm centre-to-centre dimension

The single specification that determines fit is the 192 mm hole spacing; doors or drawers drilled to a different pitch will not accept this pull. Buyers needing a shorter or longer reach must select a different model.

Highlights

  • Transitional design elevates cabinetry style
  • Clean edges and beaded sides create visual impact
  • 192 mm centre-to-centre fits standard drilling
  • Included 8/32 screws enable quick installation
  • Honey Bronze finish adds warm metallic tone

Specifications

BrandRICHELIEU
TypeCabinet & Drawer Hardware

Questions about this item

How do I install the 192 mm Honey Bronze pull and what is the common mistake with the included 8/32 screws?

Drill two holes exactly 192 mm apart, then fasten the supplied 8/32 screws from the back of the cabinet door or drawer front. The frequent error is using the wrong drill-bit size, which strips the threads or leaves the pull loose.

Will the Honey Bronze finish on this pull need any upkeep or replacement parts over time?

The finish is a factory-applied coating; no periodic treatment is required. Only the 8/32 mounting screws might need replacement if they are lost or damaged during a future cabinet refit.

What is the first limitation you hit when the pull sees heavy daily use?

The 8/32 screw threads in the cabinet material will loosen before the solid pull body shows any wear, so the mounting points are the practical limit under sustained pulling force.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.