We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ranco 1309007-044 plug-in temperature sensor open housing gray probe two inch

Ranco

Ranco 1309007-044 Plug-In Temperature Sensor Element Open -30 to 220F

SKU CH-4D74-2JDPC

Plug-in thermistor sensor element measuring -30 to 220 °F with a 2-inch probe for building-automation systems

  • TypeStandard
  • Wide -30 °F to 220 °F range covers demanding HVAC applications
  • Thermistor element provides reliable temperature feedback for building automation systems
  • Plug-in electrical connection enables quick installation without wiring tools
  • Open-mounted gray housing suits panel or duct mounting in mechanical rooms
  • Ranco 1309007-044 model is a direct replacement sensor for compatible controls

Plug-In Sensor for Building Automation

The Ranco 1309007-044 is a plug-in temperature sensor element built for building automation systems. It uses a thermistor sensing element housed in an open-mounted grey body with a two-inch probe length. The unit operates across a range of -30 to 220 degrees Fahrenheit and carries no NEMA rating or display.

Compatibility Checks Before Ordering

Verify that your automation controller accepts a plug-in thermistor input without a specific NEMA-rated enclosure. Confirm the two-inch probe fits your mounting location and that the open housing suits the installation environment. Ensure the -30 to 220 degree Fahrenheit range covers the required monitoring limits for your application.

Open Housing and Direct Connection

The open-mounted housing means the sensing element is exposed, requiring a protected installation spot away from moisture or physical damage. The plug-in electrical connection allows direct wiring to compatible terminal blocks without extra cable assemblies. No display or output module is included, so readout depends entirely on the connected building automation system.

Highlights

  • Wide -30 °F to 220 °F range covers demanding HVAC applications
  • Thermistor element provides reliable temperature feedback for building automation systems
  • Plug-in electrical connection enables quick installation without wiring tools
  • Open-mounted gray housing suits panel or duct mounting in mechanical rooms
  • Ranco 1309007-044 model is a direct replacement sensor for compatible controls

Specifications

BrandRANCO
TypeStandard

Questions about this item

What comes in the box with the Ranco 1309007-044 sensor and is any wiring or mounting hardware sold separately?

The package includes the plug-in thermistor element with its two-inch probe and grey open housing. No cables, connectors or mounting brackets are mentioned, so assume they must be sourced separately.

The part number ends in 044; does that indicate a different temperature range or probe length from other Ranco elements?

The 044 suffix identifies this specific plug-in element rated from -30 to 220 degrees Fahrenheit with a two-inch probe. Other suffixes correspond to different ranges or probe lengths, so match the suffix to your required specifications.

How does the -30 to 220 degree Fahrenheit range translate when the sensor is installed in a building automation system?

The thermistor will report temperatures across the full -30 to 220 degrees Fahrenheit span, allowing the automation system to monitor and control equipment throughout that entire operating window.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.