We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White rectangular main unit with front controls and a black pistol-grip hot air gun resting in a side holder

QUICK

QUICK 957D+ 580W Hot Air Soldering Station

SKU CH-MSP7-4XYZR

A 580 W hot-air soldering gun delivering 100–500 °C and up to 40 L/min airflow with three included nozzles

  • TypeGun
  • 580 W power heats the gun quickly for demanding rework
  • 100–500 °C range lets you set precise heat for every component
  • 1–100 adjustable air flow gives fine control over solder melt
  • 40 L/min maximum air volume clears joints fast on large pads
  • Three standard nozzles 2.5 mm, 4.4 mm and 8.4 mm cover common IC sizes

Hot-air station for SMD rework

The QUICK 957D+ delivers 580 W of heating power from a 220 V supply. Its gun-style handpiece reaches 100 to 500 °C with adjustable airflow up to 40 L/min. Technicians handling phone boards, laptop logic or automotive modules get a compact bench tool ready for daily lead-free work.

Three nozzles cover common component sizes

Included tips A1124 (2.5 mm), A1130 (4.4 mm) and A1300 (8.4 mm) let you switch between fine-pitch ICs and larger shields without buying extras. The station omits a three-channel memory function, so each job needs manual temperature and airflow setup.

Single-channel control limits repeat setups

Without stored profiles you must dial in 1 to 100 airflow steps and temperature for every changeover. The 110×180×151 mm footprint fits tight benches, yet the lack of preset recall slows high-mix production lines that need instant profile switching.

Highlights

  • 580 W power heats the gun quickly for demanding rework
  • 100–500 °C range lets you set precise heat for every component
  • 1–100 adjustable air flow gives fine control over solder melt
  • 40 L/min maximum air volume clears joints fast on large pads
  • Three standard nozzles 2.5 mm, 4.4 mm and 8.4 mm cover common IC sizes

Specifications

TypeGun

Questions about this item

How often will the A1124, A1130 and A1300 air nozzles need replacing?

Nozzle life depends on flux residue and physical wear; clean them after each session and swap a nozzle when the tip deforms or airflow drops noticeably.

What limits continuous operation at the 580 W rating?

The gun draws 580 W at 220 V; sustained maximum output is constrained by the internal heater’s thermal capacity and the 40 L/min peak airflow.

How loud and hot does the station get during all-day use?

Fan noise rises with the 1–100 airflow setting; at high flow the housing reaches 500 °C at the nozzle tip while the chassis stays warm but touch-safe.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.