We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten inch rubber suction cup with horizontal metal handle and release valve

Powr-Grip

Powr-Grip N6450 10 in Suction Cup Lifter Horizontal Handle

SKU CH-RNDC-JBMMH

A 10 in rubber suction cup lifts up to 175 lb on curved surfaces with a horizontal metal handle and release valve

  • Lifts 175 lb with 10 in rubber cup
  • Horizontal handle gives strong two-handed grip
  • Release valve breaks vacuum instantly
  • Works on curved surfaces from 0 to 120 °F
  • Metal handle with bimetal construction resists bending

10 in Suction Cup Lifter

The Powr-Grip N6450 is a single-cup manual lifter built for flat or curved surfaces. Its 10 in rubber cup and horizontal metal handle give one operator secure grip on glass, sheet metal or smooth stone. The unit ships with a carrying case and operates from 0 to 120 Degrees F.

Sustained load behaviour

The vacuum seal is created by a release valve and held by the bimetal mechanism without pumps or power. Under a continuous 175 lb load the cup maintains grip as long as the surface stays clean and non-porous. Heat up to the rated maximum does not degrade the rubber or the valve function.

Maximum load capacity

The 175 lb rating is the decisive figure for job-site planning. Loads heavier than this value exceed the tested limit of the single cup and require additional lifters or a different system. Buyers who need higher single-point capacity cannot use this model.

Highlights

  • Lifts 175 lb with 10 in rubber cup
  • Horizontal handle gives strong two-handed grip
  • Release valve breaks vacuum instantly
  • Works on curved surfaces from 0 to 120 °F
  • Metal handle with bimetal construction resists bending

Specifications

BrandWOODS POWR-GRIP

Questions about this item

Will the rubber cup and metal handle stay cool during continuous use in a 120 Degrees F environment?

The lifter is rated for a maximum operating temperature of 120 Degrees F, so the rubber cup and metal handle remain functional at that temperature.

What surface condition is required for the 10 in flat cup to achieve its 175 lb hold?

The flat rubber cup needs a clean, non-porous curved surface such as glass or smooth metal to develop full vacuum and reach the 175 lb capacity.

Can I attach the N6450 to my existing crane hook or does it only work hand-held?

The N6450 has no mounting thread and a horizontal handle, so it is designed for hand-held use only and cannot be bolted to a crane or hoist.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.