Polyken
Polyken 510 Red HVAC Control 11.5 mil 48mm 54yd
Red vinyl-coated cloth gaffer's tape, 11.5 mil thick by 48 mm wide and 54 yd long, rated 40 to 200 °F with 50 oz/in adhesion
- ColorRed
- 5 mil thickness resists tears on rough surfaces
- Rubber adhesive grips steel at 50 oz/in and removes clean
- Vinyl-coated cloth backing handles 40 to 200 °F environments
- 48 mm by 54 yd roll covers long cable runs
- Matte red finish reduces glare during stage or HVAC work
Polyken 510 HVAC Control Tape
This red gaffer tape uses a matte-finish vinyl-coated cloth backing with a rubber adhesive. It comes in a continuous roll measuring 48 mm wide and 54 yards long. The construction suits indoor and outdoor assembly, manufacturing, maintenance and metalworking tasks.
11.5 mil Thickness and 200 °F Rating
At 11.5 mil thick the tape handles general-purpose sealing and bundling where a heavier membrane is required. It remains functional from 40 °F up to 200 °F and delivers 50 oz/in adhesion to steel while removing without residue.
For HVAC and General Repair Crews
Technicians needing a residue-free, high-temperature cloth tape for duct work or temporary fixes will find this roll fits the job. Buyers who require a thinner profile, a different colour or a specialised fire-rated product should look at something else.
Highlights
- 5 mil thickness resists tears on rough surfaces
- Rubber adhesive grips steel at 50 oz/in and removes clean
- Vinyl-coated cloth backing handles 40 to 200 °F environments
- 48 mm by 54 yd roll covers long cable runs
- Matte red finish reduces glare during stage or HVAC work
Specifications
| Brand | POLYKEN |
|---|---|
| Color | Red |
Questions about this item
What does the 11.5 mil thickness mean once the tape is applied?
The 11.5 mil thickness gives a sturdy, conformable layer that resists tearing while wrapping irregular shapes and stays flat on ducts.
What does the rubber adhesive on vinyl coated cloth cap at in practice?
The rubber adhesive delivers 50 oz/in adhesion to steel and performs reliably from 40 to 200 degrees F.
What does the 48 mm width require for fitting or mounting?
The 48 mm (1 7/8 in) width fits standard dispensers and covers typical seam gaps in one pass.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



