We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Benchtop high-voltage DC power supply with LED display and aerial plug output cable

Pintech

Pintech PA1020 20kV 20W Industrial Power Supply

SKU CH-4ED8-PXXQE

Delivers 20 kV at 20 W with overcurrent, overvoltage and overtemperature protection, LED readout and remote control via 0–10 V signal

  • TypeDC Power Supplies
  • Voltage20kV
  • 20 kV output reaches demanding high-voltage applications
  • 20 W rating delivers focused power in a bench-top unit
  • Closed-loop control keeps voltage and current stable within 0.05 % over 8 hours
  • Over-current, over-voltage and over-temperature protection guards users and equipment
  • Remote 0 – 10 V analogue control and 0 – 5 V/10 V monitoring integrate with PLC or PC systems

Industrial 20kV 20W Bench Supply

The Pintech PA1020 is a desktop high-voltage DC power supply rated at 20kV and 20W. It operates from a 110V AC input with a 10% tolerance at 50 or 60Hz. The unit is intended for laboratory and industrial bench use where a stable high-voltage source is required.

Capacity and Headroom

The supply delivers up to 20W at the full 20kV rating, with load and line regulation of 0.01%. Stability is better than 0.05% over eight hours after a half-hour warm-up. Remote voltage control accepts a 0 to 10V signal, while monitoring outputs provide 0 to 5V or 0 to 10V proportional to the output.

Build and Connectivity

Overcurrent, overvoltage and over-temperature protections are built in for safe operation. Output is via an aerial plug connector type 16 with a one-metre high-voltage cable. A front-panel LED meter displays voltage and current in real time, and the knob allows local adjustment alongside remote interfaces.

Highlights

  • 20 kV output reaches demanding high-voltage applications
  • 20 W rating delivers focused power in a bench-top unit
  • Closed-loop control keeps voltage and current stable within 0.05 % over 8 hours
  • Over-current, over-voltage and over-temperature protection guards users and equipment
  • Remote 0 – 10 V analogue control and 0 – 5 V/10 V monitoring integrate with PLC or PC systems

Specifications

TypeDC Power Supplies
Voltage20kV

Questions about this item

Will the PA1020 run on my existing 110 V bench outlet?

Yes, the unit accepts AC 110 V±10 % at 50/60 Hz, matching standard bench power.

How can I verify the 20 kV output is stable after power-up?

The LED digital meter shows voltage and current in real time, and stability is specified as less than 0.05 % over eight hours after a half-hour warm-up.

Does the PA1020 include the high-voltage output cable and what else must I source?

A 1 m aerial plug connector type 16 cable is supplied; you only need to provide a compatible 110 V AC mains lead.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.