We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium sliding door track, 96 inches long, with four wheeled hangers and guide hardware

Pemko

Pemko H200A/8 Sliding Door Track & Hardware 96"L

SKU CH-2BXH-XTFVQ

Aluminium sliding-door track kit holds panels up to 200 lb with needle-bearing hangers and included hardware

  • TypeDoor Hardware & Components
  • Aluminium track resists corrosion for long service life
  • 96-inch length suits wide door openings
  • Needle bearings give smooth, quiet sliding action
  • Four-wheel hangers support doors up to 200 lb
  • Complete kit includes track, hangers, guide, stops and wrench

Aluminium sliding door track kit

The Pemko H200A/8 provides a complete 96-inch aluminium track with two hangers, a nylon guide, two stops and an adjusting wrench. It is designed for sliding door panels weighing up to 200 pounds. The kit suits residential or light commercial openings where a surface-mounted sliding system is preferred.

Upgrade from lighter-duty hardware

This assembly replaces tracks rated for lower door weights or those lacking needle-bearing wheels. The jump is worthwhile when the existing hardware flexes under a 200-pound panel or when the original rollers bind and create uneven travel. Builders installing a new heavy panel should specify this kit rather than reusing lighter components.

Sustained-load behaviour

Needle bearings on four wheels distribute the panel weight evenly across the 96-inch span, reducing point loading on the track. The aluminium extrusion resists deflection during repeated daily cycles, while the nylon guide maintains lateral stability without metal-on-metal wear. The included stops prevent over-travel at both ends of the run.

Highlights

  • Aluminium track resists corrosion for long service life
  • 96-inch length suits wide door openings
  • Needle bearings give smooth, quiet sliding action
  • Four-wheel hangers support doors up to 200 lb
  • Complete kit includes track, hangers, guide, stops and wrench

Specifications

BrandPEMKO
TypeDoor Hardware & Components

Questions about this item

What headroom height does the 1-5/16 in track need above the door opening?

The aluminum track is 1-5/16 inches tall and 96 inches long, so allow at least that much vertical clearance plus the hanger drop for the door panels.

Which step is most often missed when fitting the four needle-bearing wheels onto the hangers?

Install the two hangers with their four needle-bearing wheels onto the track first, then use the included adjusting wrench to set the door height before tightening the lock nuts.

When should the nylon guide and two stops be checked or replaced?

Inspect the nylon guide and stops whenever the door feels rough; replace them if the guide shows deep wear or the stops no longer hold the 200 lb door panels securely.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.