We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Steel cheek block with side-mount bracket and single grooved sheave

Peerless Industries, Inc.

Peerless Industries, Inc. Cheek Block Wire Rope 1/4 in Max Cable Size hand tool

SKU CH-26TD-2039B

Side-mounted steel cheek block redirects 1/4 in wire rope with a 2 in sleeve-bearing sheave

  • TypeAngle, Pitch & Slope Locators
  • Side-mount pulley redirects wire rope efficiently
  • 1/4 in max cable diameter fits common rigging tasks
  • 2 in steel sheave resists wear under load
  • Sleeve bearing keeps operation smooth without lubrication
  • 7/32 in bolt hole allows secure steel-frame attachment

Cheek Block for Wire Rope

The Peerless cheek block is a side-mount pulley designed for lifting or pulling tasks with wire rope up to 1/4 in diameter. It suits rigging professionals and maintenance crews who need a fixed redirect point on structural steel.

Bolt-on installation with sleeve bearing

The block mounts through a 7/32 in hole using a bolt-on pattern and runs on a steel sleeve bearing with a single groove. Alignment must be checked so the rope enters the 2 in outside-diameter sheave squarely; misalignment causes rapid groove wear and bearing bind.

Verify rope size and mounting geometry

Confirm the working wire rope is exactly 1/4 in and that the structure can accept the side-mount footprint with the stated hole spacing. The sheave inside diameter is 1 17/32 in and depth is 15/32 in — ensure the rope bend radius and fleet angle suit the application. No working load limit is rated by the manufacturer.

Highlights

  • Side-mount pulley redirects wire rope efficiently
  • 1/4 in max cable diameter fits common rigging tasks
  • 2 in steel sheave resists wear under load
  • Sleeve bearing keeps operation smooth without lubrication
  • 7/32 in bolt hole allows secure steel-frame attachment

Specifications

BrandPeerless
TypeAngle, Pitch & Slope Locators

Questions about this item

How can I confirm the cheek block is operating correctly after bolting it on?

After mounting, feed a 1/4 in wire rope through the 2 in steel sheave and apply a light load; the 15/32 in deep groove should keep the rope seated and the sleeve bearing should rotate freely without binding.

What comes with the Peerless cheek block and what must I supply?

The package includes the steel cheek pulley block with a 7/32 in mounting hole; you must provide the mounting bolt, a 1/4 in wire rope and any rigging hardware needed for your lifting or pulling setup.

Which version should I choose for a 1/4 in wire rope?

This model is built specifically for 1/4 in wire rope with a 2 in outside diameter sheave and 15/32 in groove depth; select it when those dimensions match your rigging requirements.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.