Peerless Industries, Inc.
Peerless Industries, Inc. 3-010-29-86 Pulley Block, Wire Rope, 3/16 in Max Cable Size
A side-mount steel pulley block for lifting and pulling with 3/16 in wire rope
- TypeMasonry Tools
- Lifts and pulls with 3/16 in wire rope
- Side-mount bolt-on design secures to structures
- Steel housing and sheave resist wear
- Sleeve bearing delivers smooth rotation
- Single groove keeps rope aligned
Side-Mount Pulley Block
The Peerless side-mount pulley block handles wire rope up to 3/16 in diameter for lifting or pulling tasks. A single steel sheave with a sleeve bearing runs on a 1 27/32 in inside diameter and 11/32 in depth. The housing and sheave are both steel, and the unit bolts on through a 5/32 in mounting hole.
Bolt-On Attachment Frees Routing Options
The bolt-on mount lets you secure the block to a flat surface without welding or clamping hardware. One groove keeps the wire rope aligned while the side-mount orientation leaves the pull direction flexible. No working load limit is rated, so the block suits only non-critical rigging where a certified rating is not required.
Steel Construction With Sleeve Bearing
The steel sheave and housing resist wear in normal lifting and pulling use. A sleeve bearing provides simple rotation without sealed bearings that could contaminate. Operation stays quiet under light loads, and the all-steel build draws no power. Avoid shock loads or sustained heavy tension beyond the unrated capacity.
Highlights
- Lifts and pulls with 3/16 in wire rope
- Side-mount bolt-on design secures to structures
- Steel housing and sheave resist wear
- Sleeve bearing delivers smooth rotation
- Single groove keeps rope aligned
Specifications
| Brand | Peerless |
|---|---|
| Type | Masonry Tools |
Questions about this item
What is the working load limit of the Peerless 3-010-29-86 pulley block?
The pulley block is not rated for a working load limit, so it should not be used for critical lifting applications where a rated capacity is required.
How much noise or heat does the Peerless 3-010-29-86 pulley block generate during continuous operation?
As a manual steel pulley block with a sleeve bearing, it operates silently and produces no heat during lifting or pulling tasks.
What mounting hardware must I already own to install the Peerless 3-010-29-86 pulley block?
You need bolts sized for the 5/32 in mounting holes and a side-mount structure to secure the block for wire rope use.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
SIEMENS
SIEMENS 52PP2D2AB 30 mm Illuminated Push Button Red 24 V LED 1NO/1NC
$179.99
0.00216259BTC
In stock