We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Zinc-plated carbon steel straight chain coil, 100 ft length

Peerless

Peerless 6045032 Straight Chain Carbon Steel 100 ft 8800 lb

SKU CH-D9E6-389K2

Carbon steel straight chain, 100 ft long with an 8,800 lb working load limit and no hook included

  • 8,800 lb working load limit for heavy-duty pulling
  • 100 ft continuous length reduces splicing needs
  • Carbon steel construction with zinc-plated finish resists corrosion
  • Welded straight links provide consistent strength per link
  • .49 lb per foot keeps handling manageable

Peerless 6045032 Carbon Steel Coil Chain

The Peerless 6045032 is a 100 ft straight coil chain made from carbon steel with a zinc-plated finish. It carries a working load limit of 8,800 lb and uses a 5/0 trade size with welded links. This chain is intended for pulling and conveying tasks rather than overhead lifting.

Thermals noise and power draw

As a passive steel chain, the product generates no heat, emits no noise and draws no electrical power during normal use. Performance depends entirely on the mechanical loads applied by the operator or attached equipment. There are no thermal or acoustic characteristics to consider.

Build quality and daily implications

Each link measures 1 1/2 in inside length by 1/2 in inside width with a material thickness of 1/4 in, yielding eight links per foot and a weight of .49 lb per foot. The welded construction and zinc plating resist corrosion in typical environments. No hook is included, so users must supply compatible end fittings for attachment points.

Highlights

  • 8,800 lb working load limit for heavy-duty pulling
  • 100 ft continuous length reduces splicing needs
  • Carbon steel construction with zinc-plated finish resists corrosion
  • Welded straight links provide consistent strength per link
  • .49 lb per foot keeps handling manageable

Specifications

BrandPEERLESS CHAIN

Questions about this item

How do I install the Peerless 6045032 straight chain and what step do people often get wrong?

Measure the 100 ft length, verify the 8800 lb working load limit, and attach rated end fittings — skipping the load-rating check is the common error.

What maintenance or replacement will the Peerless 6045032 carbon-steel chain need later?

Inspect each welded link for wear, corrosion on the zinc-plated finish, and elongation; replace the chain when any link exceeds the NACM discard criteria.

What limit appears first on the Peerless 6045032 chain under sustained use?

The 8800 lb working load limit is the first threshold reached; the chain is not rated for lifting, so exceeding that value in tension risks permanent deformation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.