PC-UNIVERSAL GLUE 808085 Adhesive White 8 fl oz 24 hr Cure
Universal adhesive bonds brick, fabric, glass, metal, tile and wood for interior and exterior use, curing fully in 24 hours with low odour and a paintable finish
- TypeCaulks
- Bonds brick, fabric, glass, metal, tile and wood
- Eco-friendly, non-toxic formula with low odour
- Paintable finish for interior and exterior use
- Full cure in 24 hours, clamp time three hours
- Withstands temperatures up to 200 degrees F
White adhesive for multi-material bonding
PC-UNIVERSAL GLUE 808085 is a white adhesive supplied in an 8 fl oz bottle for interior and exterior use. It bonds brick, fabric, glass, metal, tile and wood without foaming. The formula is non-toxic, low-odour and eco-friendly. Builders and DIY users needing a paintable glue for mixed substrates will find it suitable.
24-hour full cure sets the work schedule
Full cure requires 24 hr at room temperature, with a 3 hr clamp time before the joint can handle stress. Maximum performance temperature is 200 Degrees F. The adhesive reaches a maximum viscosity of 10, 000 cps and does not fill gaps. Users who need faster handling or gap-filling capability should choose a different product.
Brush or spread directly from the bottle
No special application tools are required; the liquid dispenses straight from the container onto clean surfaces. Clamps or weights must remain in place for at least 3 hr while the bond develops. The cured joint accepts paint for finishing. The product is restricted from sale in certain states, so verify local availability before planning the job.
Highlights
- Bonds brick, fabric, glass, metal, tile and wood
- Eco-friendly, non-toxic formula with low odour
- Paintable finish for interior and exterior use
- Full cure in 24 hours, clamp time three hours
- Withstands temperatures up to 200 degrees F
Specifications
| Type | Caulks |
|---|---|
| Brand | PC-UNIVERSAL GLUE |
Questions about this item
What does the 24-hour full cure time mean for my project timeline?
The adhesive reaches full strength after 24 hours, so plan for parts to remain clamped or supported for at least a day before applying load or stress.
How does the 10,000 cps maximum viscosity affect application and gap filling?
The adhesive has a medium-thick consistency that resists sagging on vertical surfaces but does not fill gaps; surfaces must fit closely for a strong bond.
What container size and type should I expect for storage and dispensing?
The product comes in an 8 fl oz bottle designed for direct application without special tools or equipment.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



