We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Box of 2000 galvanised 16 gauge angled finish nails, 1.5 inch length, 20 degree collation, 50 per strip

Paslode

Paslode Angled Finish Nail 16ga 1-1/2 In PK2000 650231 pneumatic accessory

SKU CH-ZZJY-0QJJQ

16-gauge angled finish nails, 1.5 in long, galvanised steel, 20-degree glue-collated strips of 50 for pneumatic nailers, 2000 per pack

  • TypePneumatic Nails & Staples
  • MaterialHAWA
  • 16-gauge finish nails for precise trim work
  • 20-degree angled collation fits compatible Paslode nailers
  • 1-1/2 inch length suits standard finish applications
  • Galvanized steel resists corrosion on exterior jobs
  • 2,000-count pack keeps large projects supplied

Paslode 16-Gauge Angled Finish Nails

These 16-gauge angled finish nails come in a 2,000-count pack for trim and cabinet work. The galvanized steel shank resists corrosion on interior and exterior jobs. Each strip holds 50 nails collated at a 20-degree angle for compatible pneumatic nailers. The chisel point and smooth shank drive cleanly into hardwoods and softwoods.

Verify nailer compatibility and collation angle

Confirm your finish nailer accepts 16-gauge nails with a 20-degree collation angle before ordering. Check the tool manual for model numbers 500910, 900600 or 902400 to ensure proper feeding. The glue-collated strips must match the magazine design to prevent jams. Galvanized finish suits most indoor and protected outdoor applications.

Fits straight into angled finish nailers

Load the strips directly into the magazine of a compatible 16-gauge angled finish nailer — no adapter required. The 1-1/2-inch length handles baseboards, crown moulding and furniture assembly in a single fastener. Galvanized coating eliminates the need for separate corrosion-resistant fasteners on damp-site trim. The small pack size keeps the work area tidy and reduces waste on finish carpentry jobs.

Highlights

  • 16-gauge finish nails for precise trim work
  • 20-degree angled collation fits compatible Paslode nailers
  • 1-1/2 inch length suits standard finish applications
  • Galvanized steel resists corrosion on exterior jobs
  • 2,000-count pack keeps large projects supplied

Specifications

BrandPaslode
TypePneumatic Nails & Staples
MaterialHAWA

Questions about this item

What comes in the pack and do I need a nailer to use them?

The pack contains 2,000 galvanised steel 16-gauge angled finish nails collated in 50-nail strips at a 20-degree angle. A compatible pneumatic finish nailer is required to drive them.

Which nailer models are these nails made for?

They are manufactured for use with Paslode models 500910, 900600 and 902400; check your nailer manual to confirm it accepts 16-gauge 20-degree collated strips.

How does the 1-1/2 inch length perform in typical trim work?

At 1.5 inches long with a smooth shank and chisel point, the nails provide secure holding power for baseboards, crown moulding and other finish carpentry without splitting most hardwoods.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.