Paslode
Paslode 18 ga 1-1/4 in Galvanized Brads PK2000 650213
18-gauge galvanized steel brads, 2000 pieces in 50-piece strips for compatible pneumatic nailers
- TypePneumatic Nails & Staples
- MaterialHAWA
- Galvanized finish resists corrosion on exterior trim
- 18-gauge thickness suits delicate finish carpentry
- Chisel point reduces wood splitting during fastening
- Glue-collated strips feed smoothly in compatible nailers
- 2000 brads per pack covers large projects
Paslode 18 ga Galvanized Brads 1-1/4 in
These 18-gauge galvanized brads measure 1-1/4 inches in length and come in a 2000-count pack. The smooth shank and chisel point suit finish and trim work. Each brad has a 1.25-inch shank diameter and T-head design. The glue-collated strips feed cleanly in compatible pneumatic nailers.
Finish carpenters and trim installers
Builders needing longer fasteners or a different gauge should look at other options. The 18-gauge size limits holding power for heavy structural joints. Users with nailers that require angled collation cannot use these straight strips. Projects demanding stainless steel corrosion resistance need a different material.
Glue-collated strip compatibility
The brads are assembled in straight 0-degree strips of 50 pieces for the listed Paslode models. Mismatched collation angle or strip style will cause jams or misfires. Verify your nailer accepts this exact collation before purchase. The 2000-piece quantity supports extended jobs without frequent reloading.
Highlights
- Galvanized finish resists corrosion on exterior trim
- 18-gauge thickness suits delicate finish carpentry
- Chisel point reduces wood splitting during fastening
- Glue-collated strips feed smoothly in compatible nailers
- 2000 brads per pack covers large projects
Specifications
| Brand | Paslode |
|---|---|
| Type | Pneumatic Nails & Staples |
| Material | HAWA |
Questions about this item
How many brads are in each glue-collated strip that feeds the nailer?
Each strip holds 50 brads glued at a 0-degree angle for straight feed into compatible Paslode 18-gauge tools.
What does the 18-gauge rating tell me about the brad thickness and the nailers it fits?
The 18-gauge wire measures 1.25 mm thick and fits Paslode finish nailers such as models 500959, 515600 and 918100.
Will the 1-1/4 inch length and T-head profile sit flush in standard trim without splitting thin stock?
The 1-1/4 inch chisel-point brad with a T-head drives clean into trim; the smooth shank and galvanized finish reduce splitting in thin material.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
SIEMENS
SIEMENS 52PP2D2AB 30 mm Illuminated Push Button Red 24 V LED 1NO/1NC
$179.99
0.00214269BTC
In stock