We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Box of 2000 galvanized 16-gauge angled finish nails, 1.25 in long

Paslode

Paslode 16 Ga 1 1/4 in Finish Nails 2000 pk

SKU CH-Z13K-T88HE

Angled 16-gauge galvanised steel finish nails in 50-piece strips, 2000 per pack for compatible pneumatic nailers

  • TypePneumatic Nails & Staples
  • MaterialHAWA
  • Galvanised steel resists corrosion for lasting hold
  • 16-gauge thickness suits standard finish nailers
  • 20-degree angled collation feeds smoothly in compatible tools
  • Chisel point drives cleanly into trim without splitting
  • 2,000-piece pack keeps large jobs supplied

Paslode 16 Ga Angled Finish Nails

These 16-gauge angled finish nails are designed for pneumatic nailers used in trim and finish carpentry. The galvanised steel construction resists corrosion on interior and protected exterior jobs. Each nail measures 1 1/4 inches in overall length with a smooth shank and chisel point. They are collated in 20-degree glue strips for reliable feeding.

2000-count pack with 50-nail strips

The box contains 2000 nails arranged in glue-collated strips of 50, reducing reload frequency during extended trim runs. The 1.25-inch shank diameter and T-head profile provide secure holding power in hardwood and softwood. Galvanised finish adds a protective layer for humid environments. Capacity suits multi-room installations without frequent restocking.

Compatible with Paslode 500910 and 900600 nailers

These nails are manufactured for use with Paslode models 500910 and 900600, referenced by manufacturer number 902400. The 20-degree collation angle matches the magazine geometry of those tools. Glue collation minimises debris in the nailer mechanism. Builders using other brands must verify 20-degree strip compatibility before purchase.

Highlights

  • Galvanised steel resists corrosion for lasting hold
  • 16-gauge thickness suits standard finish nailers
  • 20-degree angled collation feeds smoothly in compatible tools
  • Chisel point drives cleanly into trim without splitting
  • 2,000-piece pack keeps large jobs supplied

Specifications

BrandPaslode
TypePneumatic Nails & Staples
MaterialHAWA

Questions about this item

Will these 16 gauge, 20 degree angled finish nails feed reliably in my older Paslode 500910 finish nailer?

Yes, the manufacturer lists model 500910 as compatible with these 16 gauge nails that have a 20 degree collation angle and glue strip collation.

How can I verify the nails are driving to the correct depth after loading a strip of 50?

Fire a test nail into scrap material; the chisel point and smooth shank should seat the T head flush or slightly below the surface without jamming.

Does the 2000 count pack include any fuel cells or lubrication for the nailer?

The pack contains only 2000 galvanized steel finish nails in 50 nail strips; fuel cells and tool oil are sold separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.