We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Panduit

Panduit PLT4S-M Cable Tie 14.5 in 4 in Bundle Natural Nylon

SKU CH-KDR5-N82TV

Standard cable tie secures bundles up to 4 in with 50 lb tensile strength and plenum-rated nylon 6/6

  • TypeCable Management & Conduit
  • Secures bundles up to 4 in with 50 lb tensile strength
  • Natural Nylon 6/6 resists heat from -76 to 185 Degrees F
  • Halogen-free, low-smoke material meets plenum safety standards
  • 5 in length and .19 in width suit standard cable runs
  • UL Type 21S and 2S listing confirms code compliance

Standard Nylon Cable Tie

The Panduit PLT4S-M is a standard cable tie designed for bundling wires and cables in indoor environments. It suits installers and technicians who need a reliable fastening method for routine cable management tasks. The natural nylon construction provides a clean, professional appearance in panels and trays.

Plenum-Rated Nylon 6/6 Build

Moulded from Nylon 6/6, the strap measures 14.5 in long by 0.19 in wide with a thickness of 0.06 in. A plastic pawl locking mechanism secures the tie around bundles up to 4 in in diameter. The material is halogen-free, low-smoke and plenum rated, meeting UL Type 21S and 2S requirements for use in air-handling spaces.

50 lb Tensile Strength Rating

The tie delivers a tensile strength of 50 lb, defining the maximum load the strap can withstand before failure. This single figure determines whether the fastener is adequate for the intended bundle weight and vibration environment. The operating temperature range spans -76 Degrees to 185 Degrees F, supporting stable performance across varied indoor conditions.

Highlights

  • Secures bundles up to 4 in with 50 lb tensile strength
  • Natural Nylon 6/6 resists heat from -76 to 185 Degrees F
  • Halogen-free, low-smoke material meets plenum safety standards
  • 5 in length and .19 in width suit standard cable runs
  • UL Type 21S and 2S listing confirms code compliance

Specifications

BrandPanduit
TypeCable Management & Conduit

Questions about this item

What bundle diameter does the 14.5 in cable tie actually secure?

The nominal maximum bundle diameter is 4 in, so the tie reliably holds bundles up to that size.

How much clearance does the 0.19 in wide tie need to pass through a panel or tray?

At 0.19 in wide and 0.06 in thick, the tie fits through standard cable-tie holes and narrow routing channels without forcing.

How do you lock the plastic pawl correctly on the first pull?

Insert the tapered tail fully into the head, pull straight until the pawl clicks, then trim the excess; angling the tail often leaves the pawl unengaged.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.