We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aluminium circuit board holder with V-groove arms, 12 inch capacity

PanaVise

PanaVise 315 Circuit Board Holder 12 in

SKU CH-W6CJ-0FRV8

Holds circuit boards up to 12 inches wide and 0.156 inches thick with V-groove tips on a 4.125-inch aluminum shaft compatible with 300 series bases

  • TypeVises
  • MaterialHAWA
  • Weight1.3
  • Holds circuit boards up to 12 in wide and 0.156 in thick
  • V-groove tips grip boards securely during soldering or inspection
  • 14 in overall width gives stable platform for large assemblies
  • Compatible with all 300 series bases for flexible mounting
  • 3 lb aluminum construction is lightweight yet rigid

Circuit Board Holder for 12 in Boards

The PanaVise 315 is an aluminium circuit board holder designed for technicians who need a stable platform while soldering or inspecting printed circuit boards. It clamps boards up to 12 inches wide and 0.156 inches thick using V-grooves at the arm tips. The holder attaches to any 300 series base via a 5/8 inch diameter shaft that is 4.125 inches long.

Thermals Noise and Power

As a purely mechanical hand tool, the holder produces no heat, draws no power and operates in complete silence. Its aluminium construction resists corrosion and conducts heat away from the workpiece during prolonged soldering sessions. No electrical connection or external energy source is required for normal use.

Mounting Compatibility With 300 Series Bases

The single specification that determines fit is the 5/8 inch diameter mounting hole, which matches every PanaVise 300 series base. Builders who need a different mounting pattern or a base that is not part of the 300 series cannot use this holder without an adapter that is not included.

Highlights

  • Holds circuit boards up to 12 in wide and 0.156 in thick
  • V-groove tips grip boards securely during soldering or inspection
  • 14 in overall width gives stable platform for large assemblies
  • Compatible with all 300 series bases for flexible mounting
  • 3 lb aluminum construction is lightweight yet rigid

Specifications

BrandPanavise
Model315
TypeVises
MaterialHAWA
Weight1.3

Questions about this item

How do I install the PanaVise 315 onto a 300 series base, and what step is often missed?

Insert the 4.125 in shaft into the base's 5/8 in mounting hole and tighten the set screw; the step often missed is fully seating the shaft so the V-grooves align level before clamping the board.

What maintenance or replacement will the 315 circuit board holder need over time?

The aluminum arms and V-grooves resist corrosion; only the set screw on the 5/8 in shaft may need occasional re-tightening or replacement if threads wear.

What limit appears first when holding a board near the 12 in width capacity during a long soldering session?

The 0.156 in maximum board thickness and the fixed V-groove spacing limit clamping force; boards at full width can flex, reducing grip stability before the aluminum frame yields.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.