We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver zinc-plated steel wall mount base, 16 inches square by 5.63 inches deep

Oz Lifting Products

Oz Lifting Products OZWALL1 Wall Mount Base 1200 lb Silver

SKU CH-X74Q-REJ0E

Wall-mount steel base rated for 1200 lb with 16 in height and 0.67 in mount holes

  • 1,200 lb capacity handles heavy lifting tasks
  • Steel construction with zinc-plated finish resists corrosion
  • 16 in height and width fits standard installations
  • 67 in mount holes simplify secure attachment
  • Includes mounting template for accurate positioning

Wall Mount Base 1200 lb Capacity

The Oz Lifting Products OZWALL1 is a steel wall mount base rated for a 1,200 lb maximum load capacity. It is designed to secure a mast with a 3.62 in diameter for lifting, pulling or conveying tasks. The unit measures 16 in high, 16 in wide and 5.63 in deep with a zinc plated finish.

Mounting Template Included

A mounting template is supplied to simplify hole alignment during installation. The base features mount holes of 0.67 in diameter for fastener attachment. It is compatible with Grainger part numbers 48RD46, 48RD47 and 49P538 as well as manufacturer part numbers OZ1200DAV, OZ1200DAV-ACW and OZ1200DAV-DCW.

Steel Construction Requires Proper Anchors

The zinc plated steel base installs onto a wall structure using the provided template for hole layout. Installers must select anchors rated for the 1,200 lb capacity and the specific wall material. California Proposition 65 warnings apply for chemicals known to cause cancer and reproductive harm.

Highlights

  • 1,200 lb capacity handles heavy lifting tasks
  • Steel construction with zinc-plated finish resists corrosion
  • 16 in height and width fits standard installations
  • 67 in mount holes simplify secure attachment
  • Includes mounting template for accurate positioning

Specifications

BrandOZ LIFTING PRODUCTS

Questions about this item

How often should I inspect the zinc-plated steel for corrosion?

Inspect the zinc-plated steel regularly for signs of rust or coating damage, especially at the 0.67 in mount holes and weld seams, and reapply protective coating if the finish is compromised.

Will the 1,200 lb capacity hold if I mount a 3.62 in mast at full 16 in height?

The 1,200 lb rating applies when the 3.62 in mast is properly secured to the 16 in high base using all four 0.67 in mounting holes with Grade 5 or better hardware.

Does the steel base get hot or make noise during continuous lifting cycles?

The steel wall mount base itself produces no heat or noise; any temperature rise or sound comes from the separate davit winch and load, not the 16 in by 16 in by 5.63 in mounting plate.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.