We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Uncoated carbide router bit, 1/16 inch cutter, 1/4 inch shank, 2 inch length

Onsrud

Onsrud 64-000 Router Bit 1/16 in 1/4 in 2 in

SKU CH-NDMH-G8YCA MPN 64-000

Solid carbide router bit with down-cut O-flute geometry for clean cuts in aluminium, MDF, plastic and wood

  • TypeRouters
  • MaterialCarbide
  • Color/FinishUncoated
  • Solid carbide construction resists wear
  • Super spiral O-flute clears chips efficiently
  • 1/16 in cutter suits fine detail work
  • Cuts aluminum, MDF, plastic and wood
  • Uncoated finish keeps edges sharp

Solid carbide router bit

The Onsrud 64-000 is a solid carbide router bit with a 1/16 inch cutter diameter and a 1/4 inch shank. Its overall length measures 2 inches. The tool features a down-cut O-flute spiral geometry and ships uncoated.

Aluminium, plastic and wood machining

The down-cut spiral forces chips downward, leaving a clean top edge on aluminium, MDF, plastic and wood. It is not suited for applications that require up-cut chip evacuation or for cutting ferrous metals.

1/16 inch cutter diameter

The 1/16 inch cutting diameter determines the minimum internal radius and the level of detail achievable. Verify that your project requires this specific cutter size before ordering.

Highlights

  • Solid carbide construction resists wear
  • Super spiral O-flute clears chips efficiently
  • 1/16 in cutter suits fine detail work
  • Cuts aluminum, MDF, plastic and wood
  • Uncoated finish keeps edges sharp

Specifications

TypeRouters
BrandOnsrud
Model64-000
MaterialCarbide
Color/FinishUncoated

Questions about this item

What comes in the box with the Onsrud 64-000 router bit?

The box contains the single solid carbide router bit. No collet, wrench or additional accessories are included.

How do I choose between the 1/16 in and 1/4 in dimensions listed for the 64-000?

The 1/16 in figure is the cutting diameter and the 1/4 in figure is the shank diameter; both belong to the same bit.

What does the 2 in length mean when the bit is mounted in a router?

The 2 in measurement is the overall length of the bit, giving the maximum reach from the collet face to the tip.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.