We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black flexible elastomeric tee pipe fitting with closed-cell foam structure

Nomaco Kflex

Nomaco Kflex 801-T-100448 Elastomeric Tee Pipe Fitting

SKU CH-PEB0-TFHQQ

Insulates 4-1/2 in pipe tees with closed-cell Buna-N/PVC rated to 220 °F and UL 94 flame spread 25

  • TypeTarps
  • Withstands extreme cold down to -297 °F
  • Handles high heat up to 220 °F
  • Achieves R-value 5.9 for thermal efficiency
  • Meets UL 94 with flame spread index 25
  • Antimicrobial closed-cell foam resists microbial growth

Product identity

The Nomaco Kflex 801-T-100448 is an elastomeric tee fitting designed to insulate pipe junctions in commercial and industrial mechanical systems. It suits contractors and maintenance teams who need a flexible, closed-cell foam component for thermal protection on 4-inch piping.

Installation notes

The unslit form requires the installer to cut and wrap the fitting around existing pipework, then seal the seam with compatible adhesive tape or mastic. Common issues include gaps at the joint if the cut is not tight and reduced thermal performance when the seal is incomplete.

Interface limits

The Buna-N rubber and PVC blend operates continuously from -297 to 220 degrees F and carries a flame spread index of 25 with a UL 94 rating. The material provides an R-value of 5.9 and is plenum rated, but it is not intended for service beyond the stated temperature range or for structural load-bearing applications.

Highlights

  • Withstands extreme cold down to -297 °F
  • Handles high heat up to 220 °F
  • Achieves R-value 5.9 for thermal efficiency
  • Meets UL 94 with flame spread index 25
  • Antimicrobial closed-cell foam resists microbial growth

Specifications

BrandK-FLEX USA
TypeTarps

Questions about this item

How can I verify the Nomaco Kflex 801-T-100448 tee fitting is performing correctly after installation?

Confirm the system operates within the -297 to 220 °F range and that the closed-cell foam remains intact with no condensation on the 4-1/2 in ID surface.

What comes with the 801-T-100448 elastomeric tee and what must I source separately?

The package contains the pre-formed black Buna-N/PVC tee fitting for 4 in pipe; adhesive, tape, vapor-barrier coating and cutting tools are not included.

Which version of the Kflex tee should I select for a 4 inch pipe with a 1 inch wall requirement?

Choose the 801-T-100448 model; it matches a 4-1/2 in tube OD, 1 in wall thickness and carries a 5.9 R-value for that exact size.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.