We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A galvanised sheet steel centrifugal fan with forward curved impeller, 146 mm diameter, IP44 rated

NDLIULEI

NDLIULEI D2E146-AP47-02 230V M2E068-EC 146mm Forward Leaning Centrifugal Fan

SKU CH-4V3H-MA6PZ

A 146 mm forward-leaning centrifugal fan running at 2050 or 2550 rpm on 230 VAC with IP44 protection and ball-bearing motor

  • TypeCase Fan
  • 146 mm impeller fits tight enclosures
  • 230 VAC 50/60 Hz supply matches industrial power
  • 2050/2550 rpm delivers strong airflow
  • IP44 rating protects against splashes and dust
  • 2 kg galvanised steel housing ensures durability

Industrial Centrifugal Fan for HVAC Systems

The NDLIULEI D2E146-AP47-02 is a 230VAC forward-leaning centrifugal fan built for industrial cooling and ventilation. It uses an ebm-papst M2E068-EC motor with ball bearings and runs at 2050 or 2550 RPM depending on the supply frequency. The impeller and housing are made from galvanised sheet steel and the unit weighs 4.2 kg. It carries IP44 protection and insulation class B for reliable operation in demanding environments.

Verify Voltage Frequency and Mounting Space

Confirm that your installation supplies 230VAC at either 50 Hz or 60 Hz before ordering. The fan draws 1.31 A at 300 W on 50 Hz and 1.45 A at 330 W on 60 Hz, so the circuit and any speed controller must handle these currents. A 400 VDB capacitor is required for operation. The 146 mm impeller diameter and 68 mm motor size determine the physical footprint, so check the available clearance in your enclosure or ductwork.

Suits Maintenance and OEM Integration Not Portable

This fan suits technicians replacing a failed unit in Siemens variable-frequency drives or builders integrating forced-air cooling into fixed HVAC equipment. The CCC and EAC approvals support compliance in regulated markets. It is not intended for portable or low-voltage applications, nor for installations that cannot accommodate a 4.2 kg sheet-steel assembly with IP44 ingress protection. Buyers needing variable-speed EC control without an external drive should look elsewhere.

Highlights

  • 146 mm impeller fits tight enclosures
  • 230 VAC 50/60 Hz supply matches industrial power
  • 2050/2550 rpm delivers strong airflow
  • IP44 rating protects against splashes and dust
  • 2 kg galvanised steel housing ensures durability

Specifications

TypeCase Fan

Questions about this item

Does the package include only the fan or are mounting brackets and a capacitor supplied as well?

The package contains the fan only; mounting brackets and the 400VDB capacitor must be sourced separately.

Should I select the 50 Hz or 60 Hz rating when wiring this 230VAC unit?

The motor runs at 2050 RPM and 300 W on 50 Hz, and at 2550 RPM and 330 W on 60 Hz; choose the rating that matches your supply frequency.

What airflow and pressure can I expect once the 146 mm impeller spins at 2550 RPM in a live system?

At 2550 RPM the fan draws 1.45 A and 330 W, delivering the catalogue pressure curve for the D2E146-AP47-02; actual flow depends on your duct resistance.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.