We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue snagless Cat6 patch cable with gold RJ45 connectors and strain relief boots, 50 ft length

NavePoint

NavePoint Cat6 Snagless UTP Ethernet Network Patch Cable 50 FT Blue 10 Gbps 250 MHz 24 AWG

SKU CH-2A3N-JBT29

50 ft blue Cat6 patch cable with snagless RJ45 connectors, 24 AWG stranded copper, gold-plated contacts and 250 MHz bandwidth for 10 Gbps Ethernet

  • ColorBlue
  • Snagless boots protect the latch during frequent unplugging
  • Stranded 24 AWG copper conductors keep the cable flexible for tight routing
  • 10 Gbps bandwidth supports full Gigabit and 10-Gigabit network speeds
  • Gold-plated RJ45 contacts resist corrosion for a lasting signal
  • 50-foot length spans rooms or rack aisles without extra couplers

Universal Connectivity for Gigabit Networks

The NavePoint Cat6 Snagless UTP Ethernet patch cable provides a 50 FT link for servers, computers, routers, switches, VOIP phones and network media players. Its universal RJ45 connectors ensure compatibility with any standard LAN device requiring Cat6 performance. The blue PVC jacket offers durability for routing through walls, floors or cable management systems. This cable supports 10/100/1000 Base-T network speeds.

Rated for 10 Gbps at 250 MHz

The single specification that decides suitability is the maximum data transfer rate of 250 MHz and maximum transfer speed of 10 Gbps. Stranded copper conductors built to 24 AWG with 7*0.18 mm strands and HD-PE insulation deliver low signal loss across the full length. Gold-plated contacts maintain reliable conductivity over repeated insertion cycles. Conductor DC resistance is specified at 117 Ohm/km.

Snagless Design Simplifies Dense Installations

Snagless strain relief boots protect the locking tabs on both ends, preventing damage when pulling the cable through crowded racks or tight conduit. The flexible stranded construction eases routing around corners without kinking. This patch cord connects workstations to wall outlets or patches hubs to distribution panels directly. It requires no additional tools or adapters for standard RJ45 ports.

Highlights

  • Snagless boots protect the latch during frequent unplugging
  • Stranded 24 AWG copper conductors keep the cable flexible for tight routing
  • 10 Gbps bandwidth supports full Gigabit and 10-Gigabit network speeds
  • Gold-plated RJ45 contacts resist corrosion for a lasting signal
  • 50-foot length spans rooms or rack aisles without extra couplers

Specifications

BrandNavePoint
ColorBlue

Questions about this item

What does the 10 Gbps rating mean once the cable is plugged into my network?

It supports up to 10 Gbps transfer speeds on compatible 10/100/1000 Base-T networks, limited by the slowest device in the link.

How does the 250 MHz bandwidth affect real-world performance?

The 250 MHz rating caps the maximum signal frequency, enabling the 10 Gbps speed over the 50 FT length.

Will the snagless boots and 24 AWG stranded wire fit standard RJ45 ports and tight spaces?

Yes, universal RJ45 connectors fit any standard LAN port; the snagless boots protect the tab and the stranded 24 AWG construction stays flexible for routing.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.