We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Coiled copper refrigerant line set, transparent insulation, 50 ft length

Mueller

Mueller STREAMLINE 61020500B6 50 ft hvac control

SKU CH-QD3D-83X6E

Fifty-foot copper refrigerant line set with 3/8-inch liquid and 5/8-inch suction lines for air-conditioning systems

  • ColorTransparent
  • 50 ft copper roll covers long runs
  • 3/8 in. liquid and 5/8 in. suction lines fit standard AC systems
  • 1/2 in. insulation reduces thermal loss
  • Copper construction resists corrosion and handles high pressure
  • New STREAMLINE line set ready for air-conditioning installation

50 ft Copper Line Set

This 50 foot copper roll provides both liquid and suction lines for air conditioning installations. It is sized for 3/8 inch liquid and 5/8 inch suction outer diameters with half inch insulation thickness. The set arrives new and ready for professional HVAC technicians or experienced installers.

Simple Unroll and Braze

The copper tubing unrolls for straightforward measuring and cutting to fit the job site. Installers must braze joints correctly and pull a proper vacuum to avoid leaks or moisture contamination. No special tools beyond standard HVAC brazing equipment are required for the copper itself.

Stable Thermal Transfer

Half inch insulation helps maintain consistent refrigerant temperatures during extended cooling cycles. Copper construction resists corrosion and handles normal system pressures without degrading. The line set delivers reliable performance for the duration of the air conditioning season.

Highlights

  • 50 ft copper roll covers long runs
  • 3/8 in. liquid and 5/8 in. suction lines fit standard AC systems
  • 1/2 in. insulation reduces thermal loss
  • Copper construction resists corrosion and handles high pressure
  • New STREAMLINE line set ready for air-conditioning installation

Specifications

BrandSTREAMLINE
ColorTransparent

Questions about this item

How can I verify the STREAMLINE 61020500B6 line set is installed correctly?

Pressurise the system with nitrogen, check every flare and braze joint for leaks with a detector or soap bubbles, then pull a deep vacuum to 500 microns or below and confirm the micron gauge holds steady.

What comes with the STREAMLINE 61020500B6 roll and what must I supply?

The box contains a 50 ft copper roll with 3/8 in. O.D. liquid line, 5/8 in. O.D. suction line and 1/2 in. insulation. You must provide flare nuts, braze alloy, nitrogen, vacuum pump and refrigerant.

Which STREAMLINE line set diameter matches a standard residential split system?

The 3/8 in. liquid and 5/8 in. suction diameters in this 61020500B6 roll are the common sizing for many 1.5 to 3 ton air-conditioning units; confirm with the equipment manufacturer's piping chart.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.