We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow polyethylene climbing hard hat with ratchet suspension

MSA Safety

MSA Safety 10194796 Climbing Hard Hat, V-Gard H1, Ratchet

SKU CH-5KQV-294SJ

A yellow polyethylene climbing hard hat with a four-point ratchet suspension, ANSI Type 1 Class E rated and tested for high and low temperatures

  • ColorHigh-Visibility Yellow
  • ANSI Type 1 Class E rated protection
  • Ratchet 4-point suspension adjusts 6-1/2 to 8
  • High-visibility yellow polyethylene shell weighs 1.15 lb
  • Side accessory slots for attachments
  • Meets low and high temperature tests

V-Gard H1 climbing hard hat

The MSA Safety V-Gard H1 is a Type 1 Class E climbing hard hat built with a polyethylene shell in high-visibility yellow. Its four-point ratchet suspension adjusts to fit head sizes from 6-1/2 to 8 without tools. Side slots accept compatible accessories such as hearing protection or face shields. The hat meets low and high temperature performance requirements.

Lightweight shell and fixed venting

At 1.15 lb the polyethylene shell keeps neck strain low during long shifts. No ventilation openings means the shell remains sealed against falling debris and splash hazards. The ratchet mechanism tightens evenly around the crown so the hat stays centered when the wearer looks up or bends down. Reverse donning is not supported on this model.

Side-slot accessory mounting

Side slots let workers clip on MSA-approved visors, earmuffs or headlamp brackets without drilling the shell. No graphics are printed on the yellow surface so high-visibility compliance is maintained after accessories are added. The four-point suspension distributes impact energy through the ratchet straps rather than a single crown strap. Buyers needing a vented shell or reversible wear should select a different model.

Highlights

  • ANSI Type 1 Class E rated protection
  • Ratchet 4-point suspension adjusts 6-1/2 to 8
  • High-visibility yellow polyethylene shell weighs 1.15 lb
  • Side accessory slots for attachments
  • Meets low and high temperature tests

Specifications

BrandMSA SAFETY
ColorHigh-Visibility Yellow

Questions about this item

How do I adjust the 4-point ratchet suspension on the MSA 10194796 hard hat, and what mistake should I avoid?

Turn the ratchet knob until the hat sits firmly and level on your head; the common error is leaving the suspension too loose, which lets the shell shift during a climb.

Which parts of the V-Gard H1 will need replacement over time, and how often?

Replace the polyethylene shell after any impact or after five years of daily use; swap the 4-point ratchet suspension and sweatband annually or sooner if fraying or cracking appears.

What is the first limitation you hit when wearing this 1.15 lb hard hat continuously in hot conditions?

The non-vented polyethylene shell traps heat, so the wearer feels overheating and sweat buildup long before the ratchet mechanism or Class E insulation reach any limit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.