We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White V-Gard hard hat with front brim and side slots

MSA

MSA 466354 V-Gard Hard Hat, White, Type 1

SKU CH-6NQN-SQSKV

White polyethylene hard hat with four-point pinlock suspension, meeting ANSI/ISEA Z89.1-2014 Type 1 Class E and CSA Z94.1-2005 standards

  • ColorWhite
  • ANSI/ISEA Z89.1-2014 Type 1 Class E certified protection
  • CSA Z94.1-2005 Class E approved for electrical safety
  • Polyethylene shell delivers lightweight impact resistance
  • 4-point pinlock suspension adjusts to fit sizes 6–7⅛
  • Side accessory slots accept hearing and face protection

Hard hat for industrial head protection

The MSA V-Gard hard hat provides Type 1, Class E head protection for workers in construction, utilities and general industry. Its polyethylene shell meets ANSI/ISEA Z89.1-2014 and CSA Z94.1-2005 standards. The front-brim design suits users who prefer a traditional profile without high-visibility graphics.

Lightweight shell with secure suspension

The polyethylene shell weighs very little and has no vents, so it insulates against electrical contact up to Class E limits. A four-point pinlock suspension adjusts to fit hat sizes 6 through 7-1/8 and stays in place during active movement. No ventilation holes means no airflow, which some users prefer for debris protection.

Side slots accept standard accessories

Side-accessory slots let you attach face shields, hearing protection or lamp brackets without drilling the shell. The small (R) series shell fits a narrower head range, so buyers needing a larger size range should choose a different series. The hat ships new and ready for immediate site use.

Highlights

  • ANSI/ISEA Z89.1-2014 Type 1 Class E certified protection
  • CSA Z94.1-2005 Class E approved for electrical safety
  • Polyethylene shell delivers lightweight impact resistance
  • 4-point pinlock suspension adjusts to fit sizes 6–7⅛
  • Side accessory slots accept hearing and face protection

Specifications

BrandMSA SAFETY
ColorWhite

Questions about this item

How do I install the 4-point pinlock suspension in the V-Gard hard hat, and what step is commonly missed?

Align the four suspension keys with the corresponding slots inside the polyethylene shell and press each firmly until it clicks; the step often missed is confirming all four pins are fully seated before wearing.

What maintenance or replacement will the V-Gard hard hat need over time?

Inspect the polyethylene shell daily for cracks, gouges or UV chalking; replace the 4-point pinlock suspension if straps fray, stitching loosens, or the pinlock mechanism no longer holds securely.

What limit appears first when the V-Gard hard hat is worn continuously in hot, sunny conditions?

The polyethylene shell absorbs heat and can soften under prolonged direct sun, reducing impact protection before the suspension or pinlock components show wear.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.