We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Morse MHSG16 1 inch carbide grit hole saw with gulleted edge and side slot

Morse

Morse MHSG16 1" Carbide Grit Hole Saw

SKU CH-Z76C-4B9HR

Cuts hard and abrasive materials such as cast iron, cinder block and fibre‑glass with a 1" carbide‑grit edge and gulleted design for chip clearance

  • Cuts hard abrasive materials with carbide grit edge
  • Gulleted edge clears chips while cutting through block
  • Side slot eases slug removal from various thicknesses
  • 1 inch diameter suits 25 mm pipe openings
  • Requires separate Morse MA34CT arbor for operation

1" Carbide Grit Hole Saw

The Morse MHSG16 is a 1 inch (25mm) diameter hole saw with a carbide grit edge. It is designed for cutting hard or abrasive materials such as cinder block, cast iron, unglazed ceramics, fiberglass and composites. Professional tradespeople and maintenance crews use it for clean holes in tough substrates. One saw is supplied per box.

Installation requires a separate arbor

A Morse MA34CT arbor (part number 139809) must be purchased separately to mount this hole saw. The unique side slot improves leverage for slug removal across various material thicknesses. Forgetting the correct arbor is the most common issue, leaving the saw unusable until the matching part arrives. The gulleted cutting edge clears chips during the cut.

Carbide grit suits abrasive materials only

This cutting edge works on hard, abrasive surfaces but is not intended for general-purpose wood or metal cutting. The carbide grit wears differently than toothed blades and requires steady pressure and appropriate speed. Buyers needing fast cuts in soft wood or standard mild steel should choose a different hole saw type. The 1 inch diameter fixes the hole size.

Highlights

  • Cuts hard abrasive materials with carbide grit edge
  • Gulleted edge clears chips while cutting through block
  • Side slot eases slug removal from various thicknesses
  • 1 inch diameter suits 25 mm pipe openings
  • Requires separate Morse MA34CT arbor for operation

Specifications

BrandMORSE

Questions about this item

How do I know the carbide grit edge is cutting properly in cinder block or fiberglass?

The gulleted edge clears chips as you drill, and the side slot lets you lever the slug out — smooth chip flow and easy slug removal show the saw is working as intended.

What comes in the box and what must I buy separately?

One 1 inch (25 mm) carbide grit hole saw is included; a separate Morse MA34CT arbor (139809) is required and sold separately.

Which Morse hole saw size matches the MHSG16 listing?

The MHSG16 is the 1 inch (25 mm) diameter model; choose this size when your project calls for a 1 inch hole in hard or abrasive materials.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.