We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cylindrical 32 mm carbide-tipped hole cutter with pilot drill and ejector spring

Morse

Morse CTD205 32mm carbide-tipped hole cutter

SKU CH-K2V7-42CDR

Cuts precise 32mm holes in thick sheet metal with ground carbide teeth, a step pilot drill and ejector spring for clean slug removal

  • 32mm diameter for precise holes in thick sheet metal
  • Carbide-tipped teeth deliver clean, fast cuts
  • Ground tooth profile improves cutting accuracy
  • Step center pilot drill reduces breakthrough impact
  • Ejector spring assists with slug removal

32 mm Carbide-Tipped Hole Cutter

The Morse CTD205 is a 32 mm carbide-tipped hole cutter built for precision holes in thicker sheet metal and plate. Its ground tooth profile delivers clean, fast cuts in demanding metalworking tasks. Metal fabricators and maintenance technicians will value the durable construction for repeated use.

Check Arbor and Pilot Compatibility

Verify that your drill or magnetic base unit accepts the cutter’s shank and that the CTDP 16700 pilot drill matches your existing setup. Confirm the workpiece thickness suits a shouldered body that prevents pass-through. Ensure you can accommodate the ejector spring CTDS 167017 for reliable slug removal.

Sustained Cutting Behaviour

The grooved gullet directs chips up and away from the cut, reducing clogging during extended drilling sessions. The step centre pilot drill lowers breakthrough impact, helping maintain cut quality over multiple holes. Carbide tips retain sharpness longer than standard steel when working through thick plate.

Highlights

  • 32mm diameter for precise holes in thick sheet metal
  • Carbide-tipped teeth deliver clean, fast cuts
  • Ground tooth profile improves cutting accuracy
  • Step center pilot drill reduces breakthrough impact
  • Ejector spring assists with slug removal

Specifications

BrandMORSE

Questions about this item

What comes in the box with the Morse CTD205 cutter and what must be purchased separately?

Each box contains one carbide-tipped hole cutter with a ground tooth profile, a step center pilot drill, an ejector spring, and a shouldered body that prevents pass-through. Replacement pilot drills (CTDP 16700) and ejector springs (CTDS 167017) are sold separately.

Which capacity or version of the CTD205 should be chosen for a 32 mm hole?

The CTD205 is a single 32 mm diameter model; there are no alternative capacities or versions listed for this part number. Select it when the required finished hole size is 32 mm.

What does the 32 mm diameter mean when the cutter is mounted in a magnetic drill on thick plate?

The 32 mm diameter is the finished hole size the cutter produces. The shouldered body stops the tool from passing through the workpiece, while the grooved gullet clears chips and the ejector spring helps remove the slug after the cut.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.