We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black Phillips flat-head M3 screw, galvanised steel, DIN 7046-1

ModMyMods

ModMyMods M3 x 6 Philips Flat Screw Black DIN 7046-1 (94264)

SKU CH-KNX4-9VQRD

Black Phillips flat-head screws in galvanised steel, M3 thread with 6 mm thread length and 7 mm total length, DIN 7046-1 grade

  • TypeScrews
  • MeasurementMetric
  • Head TypePhillips Flat Head
  • DrivePhillips
  • FinishBlack
  • M3 thread fits standard metric holes
  • Phillips drive installs quickly with common bits
  • Flat head sits flush for clean finish
  • Black galvanised steel resists corrosion
  • DIN 7046-1 grade ensures consistent dimensions

ModMyMods M3 x 6 Black Flat Screws

These M3 by 6 millimetre Phillips flat-head screws come in a black galvanised steel finish. They conform to DIN 7046-1 quality grade and suit general fastening tasks in PC builds, enclosures or light fabrication work. The 5 millimetre head diameter sits flush for a clean appearance.

Suits builders needing flush black M3 fixings

Buyers requiring longer thread engagement, different drive styles or corrosion-resistant stainless steel should look elsewhere. The short 6 millimetre thread limits use in thicker panels or stacked components. Non-metric or larger diameter requirements are not met by this item.

DIN 7046-1 grade defines the manufacturing standard

This specification confirms dimensional tolerances and material quality for the M3 by 6 millimetre black Phillips flat-head screw. Matching this grade ensures the fastener fits intended M3 threaded holes correctly. The 94264 part number identifies this exact product variant.

Highlights

  • M3 thread fits standard metric holes
  • Phillips drive installs quickly with common bits
  • Flat head sits flush for clean finish
  • Black galvanised steel resists corrosion
  • DIN 7046-1 grade ensures consistent dimensions

Specifications

TypeScrews
MeasurementMetric
Head TypePhillips Flat Head
DrivePhillips
FinishBlack

Questions about this item

Do the black galvanised-steel M3 x 6 screws generate any noise, heat or power draw when left installed all day?

They are passive metal fasteners with no moving parts, so they produce no noise, no heat and draw zero power once fitted.

What tools or parts must I already have to drive these M3 Phillips flat-head screws?

A standard Phillips screwdriver or bit is all that is required; no special drivers, washers or thread-locking compounds are needed.

Will these DIN 7046-1 M3 x 6 screws fit the same holes as older M3 hardware I want to keep?

They share the standard M3 thread pitch and 5 mm head diameter, so they match existing M3 tapped holes and countersinks.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.