We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Stainless steel M3 Phillips pan-head screw, 325

ModMyMods

ModMyMods M3 8mm Phillips Pan-Head Stainless Steel Screw MOD-0325

SKU CH-3NMF-2JX31

M3 stainless-steel Phillips pan-head screws for mounting fans to water-cooling radiators

  • TypeScrews
  • MeasurementMetric
  • Head TypePhillips Pan Head
  • DrivePhillips
  • MaterialStainless Steel
  • FinishStainless Steel
  • Stainless steel resists corrosion for long-lasting radiator mounts
  • Phillips pan head drives easily with common screwdrivers
  • M3 metric threads fit standard PC water-cooling radiators
  • 8 mm length secures fans without protruding
  • 325 model ensures correct thread pitch and diameter

M3 x 8 mm Phillips pan-head screws

These stainless-steel fasteners use a metric M3 thread and an 8 mm shaft length to secure fans directly to liquid-cooling radiators. They suit PC builders who are assembling custom loops and need the correct thread pitch for standard radiator mounting holes. The pan head distributes clamping force evenly across the fan frame without countersinking.

Installation uses a common Phillips driver

A standard #1 or #2 Phillips bit engages the cross recess cleanly, so no special tools are required. Because the threads are metric, forcing the screw into an imperial-threaded hole will strip either the screw or the radiator; verify the radiator’s thread specification before starting. Over-tightening can deform the thin fan frame, so stop when the head seats firmly.

Stainless steel resists corrosion under continuous

The material withstands the warm, moist airflow inside a liquid-cooled chassis without rusting or seizing over long periods. Threads remain free to allow future fan removal for cleaning or upgrade. The finish does not degrade under sustained thermal cycling the way plated carbon steel can.

Highlights

  • Stainless steel resists corrosion for long-lasting radiator mounts
  • Phillips pan head drives easily with common screwdrivers
  • M3 metric threads fit standard PC water-cooling radiators
  • 8 mm length secures fans without protruding
  • 325 model ensures correct thread pitch and diameter

Specifications

TypeScrews
MeasurementMetric
Head TypePhillips Pan Head
DrivePhillips
MaterialStainless Steel
FinishStainless Steel

Questions about this item

How do I verify the M3 x 8mm Phillips pan-head screws are holding the radiator fans securely after installation?

Check that each screw sits flush with the fan frame and that the fan does not wobble when the case is gently shaken.

What comes in the MOD-0325 pack and do I need any extra hardware to mount the fans?

The pack contains the M3 x 8mm stainless-steel Phillips pan-head screws only; no washers, nuts or tools are included.

Which screw length should I choose from the ModMyMods range for a standard 25 mm thick radiator with 25 mm fans?

Select the 8 mm length (MOD-0325) so the threads engage the radiator without bottoming out or protruding.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.