Miuputake 3001-White non-programmable thermostat hvac control
A non-programmable thermostat for single-stage 24 V heating and cooling systems with a backlit LCD and separate swing-cycle control, sold in a 12-pack
- TypeThermostat,Two Screws and anchors,Operating manual,Cable lab
- Size/Dimensions5.43 in x 3.86 in x 1.06 in
- ColorWhite
- Voltage24 volts_of_alternating_current
- Mount TypeWall Mount
- Relay ContactDigital, 24 volts_of_alternating_current
- Controls 1 heat/1 cool single-stage HVAC systems
- Large terminal blocks enable DIY install within 30 minutes
- Backlit LCD display gives clear temperature reading
- Separate swing settings optimise cycle rate for comfort
- Low-battery indicator warns before power loss
Non-Programmable Thermostat for Single-Stage Systems
The Miuputake 3001-White is a digital thermostat designed for conventional single-stage heating and cooling systems. It provides basic 1 Heat/1 Cool control with a clear white backlight LCD display. The unit operates on 24 VAC power and includes a low battery indicator for maintenance awareness. It is sold in a 12 pack for multi-zone or whole-building installations.
Suits Simple HVAC; Not for Multi-Stage
This thermostat suits homeowners and installers managing gas, oil, or electric furnaces, boilers, or cooling-only systems requiring straightforward manual temperature control. It is not for buyers needing programmable scheduling, multi-stage heat or cool support, or heat pump control with auxiliary heat. It also cannot be used with 120-240 V electric baseboard heat, hydronic 3-wire systems, mini-splits, or RV applications.
Wiring Limited to Maximum Five Connections
The base accepts a maximum of 2 to 5 wires, making it incompatible with systems requiring 6 to 8 wire connections. Installation uses large terminal blocks and a universal sub-base, typically completed within 30 minutes. Separate heating and cooling swing settings adjust cycle rates to balance comfort and energy usage. Two screws and anchors are included for wall mounting.
Highlights
- Controls 1 heat/1 cool single-stage HVAC systems
- Large terminal blocks enable DIY install within 30 minutes
- Backlit LCD display gives clear temperature reading
- Separate swing settings optimise cycle rate for comfort
- Low-battery indicator warns before power loss
Specifications
| Type | Thermostat,Two Screws and anchors,Operating manual,Cable label, Conventional Single Stage Systems, Push Button |
|---|---|
| Brand | Miuputake |
| Model | 3001-White |
| Size/Dimensions | 5.43 in x 3.86 in x 1.06 in |
| Color | White |
| Voltage | 24 volts_of_alternating_current |
| Mount Type | Wall Mount |
| Relay Contact | Digital, 24 volts_of_alternating_current |
| Item Count | 12 pack |
| Selling Unit | 1, Thermostat,Two Screws and anchors,Operating manual,Cable label |
| Features | Heating and Cooling Controls, Separate Heating and Cooling Swing (Cycle Rate), Low Battery Indicator, Miuputake |
Questions about this item
Does the 24-volt relay contact draw noticeable power or generate heat when the thermostat runs continuously?
The unit operates on 24 volts AC with a digital relay contact; power draw is minimal and no heat buildup is reported during normal all-day operation.
What existing wiring must my home already have for this 3001-White model to function?
Your system needs a conventional single-stage setup with 2 to 5 low-voltage wires (24 V AC) — multistage, heat-pump, hydronic, 120-240 V baseboard or mini-split wiring will not work.
Will this thermostat control my older gas furnace that only provides heat and has no cooling circuit?
Yes — compatible systems include gas, oil or electric furnaces and boiler radiant setups that are heat-only, as long as they are single-stage and use 24 V control wiring.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
SIEMENS
SIEMENS 52PP2D2AB 30 mm Illuminated Push Button Red 24 V LED 1NO/1NC
$179.99
0.0020873BTC
In stock