Mini Rechargeable Soldering Iron Pen 1.5-4.2V USB-C Pearlescent
A pocket-sized soldering iron with adjustable 1.5-4.2 V output, built-in USB-C cable, LED display, and removable threaded tip for on-the-go repairs
- Watts510 watts
- Pocket-sized design enables true travel convenience
- Built-in USB-C cable powers directly from phone or power bank
- Adjustable 1.5-4.2V voltage gives controlled, precise heating
- LED color screen shows voltage and battery level in real time
- Removable threaded tip handles circuit boards, wiring and DIY fixes
Pocket-sized soldering for travel repairs
This mini rechargeable soldering iron pen fits in the palm of your hand and is built for on-the-go circuit repairs, wiring fixes and DIY component swaps. A built-in USB-C cable lets you charge directly from a phone or power bank without an outlet. Adjustable voltage from 1.5 to 4.2 volts gives precise heating control for delicate work.
Voltage range sets the practical heating limit
The 1.5 to 4.2 volt adjustment range defines the maximum power the tool can deliver to the tip. At the upper end the iron draws 510 watts for fast heat-up, while lower settings suit sensitive boards and fine wires. The LED colour screen shows the selected voltage and battery level in real time so you stay within the chosen limit.
Simple setup with one common wear point
Plug the integrated USB-C cable into any USB-C source, press the quick-heat button and the tip is ready in seconds. The removable threaded tip unscrews for replacement when it wears out or when a different profile is needed. The only routine issue is tip degradation over repeated heating cycles, which is solved by swapping in a fresh threaded tip.
Highlights
- Pocket-sized design enables true travel convenience
- Built-in USB-C cable powers directly from phone or power bank
- Adjustable 1.5-4.2V voltage gives controlled, precise heating
- LED color screen shows voltage and battery level in real time
- Removable threaded tip handles circuit boards, wiring and DIY fixes
Specifications
| Watts | 510 watts |
|---|
Questions about this item
Which voltage setting should I pick for a specific soldering job?
Use the plus and minus buttons to select any level between 1.5 and 4.2 volts; lower settings suit delicate circuit boards while higher settings handle thicker wiring.
What does the 510-watt rating tell me about real-world heating speed?
The 510-watt figure represents peak power draw; the quick-heat button brings the tip to working temperature in seconds for fast starts on repairs.
How does the USB-C connection limit charging options?
The built-in USB-C cable plugs straight into a phone or power bank, so the iron charges wherever a USB-C port is available without needing a wall outlet.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



