We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black vinyl gas hose coiled 25 ft length 7.6 m

Miller - Weldcraft

Miller - Weldcraft 45V10 Vinyl Gas Hose 25 ft 7.6 m

SKU CH-JJEZ-EHA2W

Vinyl gas hose, 25 ft long, fits TIG torches including Series 20, 24W and WP-20 models

  • TypeTools
  • Vinyl construction resists cracking during TIG welding tasks
  • 25 ft length gives extended reach around the workpiece
  • 5/32 in. bore maintains steady shielding-gas flow
  • Compatible with WP-20, WP-25 and HW-20 series torches
  • Prop 65 notice alerts users to listed chemicals

Miller Weldcraft 45V10 Vinyl Gas Hose

The Miller Weldcraft 45V10 is a vinyl gas hose designed for TIG welding (GTAW) applications. It serves welders using compatible Miller torches and Linde equipment who require a 25 ft (7.6 m) supply line with a 5/32 in. inside diameter.

Upgrading from worn or incompatible hoses

This hose replaces damaged or incorrect gas lines on supported torch series including 20, 24W, 25, HW-20, HW-25, PTW-20, W-180, W-200, W-225, and W-250 models. The upgrade is worthwhile when the existing hose shows cracking, leaks, or does not match the required 5/32 in. bore for proper shielding gas flow.

Straightforward torch connection

Installation involves fitting the hose ends to the compatible torch or regulator fittings listed in the specifications. Common issues include using the hose with unsupported torch models, which can cause gas leaks, or overlooking the California Proposition 65 warning regarding chemical exposure during handling.

Highlights

  • Vinyl construction resists cracking during TIG welding tasks
  • 25 ft length gives extended reach around the workpiece
  • 5/32 in. bore maintains steady shielding-gas flow
  • Compatible with WP-20, WP-25 and HW-20 series torches
  • Prop 65 notice alerts users to listed chemicals

Specifications

BrandMILLER ELECTRIC
TypeTools

Questions about this item

What torch series and models does the 45V10 vinyl hose fit?

The hose is compatible with Series 20, 20P, 24W, 25, HW-20, HW-25, PTW-20, W-180, W-200, W-225, W-250 and Models 20, 20F, 20FHD, 20HP, 20P, 24, 24FVHD, 24HP, 24V, 24W, 25, HW-20, HW-20R, PTW-20, WP-125L, WP-125M, WP-20, WP-20V, WP-225, WP-24W, WP-25 and the Linde brand.

How do I install the hose and what step is often missed?

Push the hose onto the torch and regulator barbs until it seats fully, then secure each end with a proper hose clamp; the step most often missed is tightening both clamps so the 5/32 in. ID vinyl cannot blow off under gas pressure.

When should I replace the 25 ft vinyl gas hose?

Replace the hose if the vinyl shows cracks, hardening, abrasion cuts, or any sign of chemical degradation; California Proposition 65 warnings indicate the material contains substances linked to cancer and reproductive harm, so inspect regularly and swap it out at the first sign of wear.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.