Miller-Smith Equipment
Miller-Smith Equipment MW201 Welding Tip 7.5 in 1/32 in
Acetylene welding tip with 7.5 in length for material up to 1/32 in thick
- TypeWelding Parts & Supplies
- Welds thin material precisely with 1/32 in maximum thickness
- Soft flame suited to acetylene at 10 psi maximum pressure
- Delivers 2.3 scfh fuel and oxygen flow for steady operation
- 5 in overall length fits MW200 series torches
- Drill size 71 matches MW200 tip series compatibility
Welding Tip for 1/32 in Work
The Miller-Smith Equipment MW201 tip is made for oxy-acetylene welding on sheet metal up to 1/32 in thick. It fits the MW200 torch series and matches manufacturer parts CW5A, MW5A and WH100. The tip produces a soft flame suited to fine joinery and repair tasks. Drill size 71 sets the orifice for the specified flow rates.
Gas Pressure and Flow Limits
Maximum acetylene pressure is 10 psi with fuel and oxygen flow each capped at 2.3 scfh. Exceeding these values can overheat the tip or distort the soft flame profile. The limits define the practical window for clean welds on the rated thickness. Operators must regulate both gases within this range for consistent results.
Copper Construction and Daily Fit
The 7.5 in copper body resists heat buildup during extended passes and threads directly onto compatible MW200 handles. Standard threading means quick tip changes without special tools on the shop floor. Length gives reach into tight joints while keeping the handle clear of radiant heat. Regular inspection of the orifice keeps flow accurate over time.
Highlights
- Welds thin material precisely with 1/32 in maximum thickness
- Soft flame suited to acetylene at 10 psi maximum pressure
- Delivers 2.3 scfh fuel and oxygen flow for steady operation
- 5 in overall length fits MW200 series torches
- Drill size 71 matches MW200 tip series compatibility
Specifications
| Brand | SMITH EQUIPMENT |
|---|---|
| Type | Welding Parts & Supplies |
Questions about this item
Which MW200-series tip size should I pick for 1/32 in plate?
The MW201 tip is drilled to size 71 and rated for a maximum welding thickness of 1/32 in, making it the correct choice for that material.
What does the 10 psi acetylene rating mean when I am welding?
It is the maximum fuel pressure the tip can accept; running acetylene above 10 psi would exceed the design limit and can cause unstable flames or tip damage.
How do the 2.3 scfh flow limits affect torch operation?
Both fuel and oxygen are capped at 2.3 scfh, so the torch valves and regulators must be set at or below that flow to stay within the tip’s rated capacity.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
SIEMENS
SIEMENS 52PP2D2AB 30 mm Illuminated Push Button Red 24 V LED 1NO/1NC
$179.99
0.00216621BTC
In stock