We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small brass brazing tip AW203 size 5/64 inch

Miller-Smith Equipment

Miller-Smith Equipment AW203 Brazing Tip 5/64 in

SKU CH-S99V-R5FPS

Acetylene brazing tip for AW200 series torches, drilled to size 67 with a 5/64 inch maximum welding thickness

  • TypeWelding Parts & Supplies
  • Precise brazing on thin material up to 5/64 in
  • Compatible with AW200 torch series for secure fit
  • Drill size 67 delivers focused flame control
  • Single flame type simplifies brazing and welding tasks
  • Maximum fuel and oxygen flow rate 3.2 scfh each

Brazing Tip 5/64 in

The Miller-Smith Equipment AW203 is a brazing tip designed for use with acetylene fuel and the AW200 torch series. It suits technicians performing brazing and welding tasks that require a 5/64 inch maximum welding thickness.

Installation and common issues

The tip threads onto compatible AW10A or AW1A torch handles with a 6 inch overall length and size 3 drill. Mismatched torch series or incorrect fuel and oxygen flow rates above 3.2 scfh can cause poor flame stability or tip damage.

Capacity and limits

The tip handles minimum brazing capacity of 3/8 inch up to a maximum of 5/8 inch with a single flame type. It reaches its limit at the stated 5/64 inch maximum welding thickness, so heavier welding jobs need a larger tip.

Highlights

  • Precise brazing on thin material up to 5/64 in
  • Compatible with AW200 torch series for secure fit
  • Drill size 67 delivers focused flame control
  • Single flame type simplifies brazing and welding tasks
  • Maximum fuel and oxygen flow rate 3.2 scfh each

Specifications

TypeWelding Parts & Supplies
BrandSMITH EQUIPMENT

Questions about this item

How can I confirm the AW203 tip is flowing correctly after connecting it to my AW200 torch?

Light the torch and check for a steady single flame; the acetylene flow should reach 3.2 scfh and oxygen flow 3.2 scfh at the 5/64 in tip size.

What comes in the package and do I need a separate torch body?

The box contains the AW203 brazing tip only; a compatible AW200 series torch such as the AW10A or AW1A must be purchased separately.

Which tip size should I choose for brazing 5/8 in maximum thickness?

Select the AW203 tip with drill size 67 and tip size 3, rated for a maximum brazing capacity of 5/8 in and welding thickness of 5/64 in.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.