Miller Enterprises
Miller Enterprises C-3010 Welding Conduit Liner 15 ft .035-.045 in
A 15 ft steel and copper liner for MIG welding guns, compatible with Roughneck C-Series models C-3010 through C-5015 and wire diameters .035 to .045 in
- TypeWelding Parts & Supplies
- 15 ft liner reduces wire drag for smoother MIG welds
- Steel and copper construction resists wear for longer service life
- Fits .035 to .045 in wire without changing liners
- Compatible with Roughneck C-Series guns including C-3010 models
- 15 ft length covers standard bench and boom setups
15 ft .035–.045 in Welding Conduit Liner
This 15 ft steel and copper liner fits Miller Roughneck C-Series guns. It supports MIG welding with wire diameters from .035 in to .045 in. The grey and white liner replaces model 202890 on compatible machines.
Who This Liner Fits
It suits welders using Roughneck C-3010, C-3012, C-3015, C-4010, C-4012, C-4015, C-5010, C-5012 or C-5015 guns. It does not suit flux-cored setups that require larger wire sizes or operators needing a shorter or longer liner length.
Wire Diameter Range .035–.045 in
The critical spec is the .035 in minimum and .045 in maximum wire diameter. Select this liner only when your wire falls inside that range and your gun model appears in the compatibility list.
Highlights
- 15 ft liner reduces wire drag for smoother MIG welds
- Steel and copper construction resists wear for longer service life
- Fits .035 to .045 in wire without changing liners
- Compatible with Roughneck C-Series guns including C-3010 models
- 15 ft length covers standard bench and boom setups
Specifications
| Type | Welding Parts & Supplies |
|---|---|
| Brand | MILLER ELECTRIC |
Questions about this item
What gun series and models does the 15 ft C-3010 liner fit?
It fits Roughneck C-Series guns including C-3010, C-3012, C-3015, C-4010, C-4012, C-4015, C-5010, C-5012 and C-5015.
How do I install the liner and what step is often missed?
Remove the old liner, feed the new steel/copper liner through the gun cable, trim it flush at the contact tip, and secure the retainer — many forget the flush trim.
When should I replace the liner on my MIG gun?
Replace it when wire feed becomes erratic, the liner shows kinks or wear, or after heavy use with .035-.045 in wire — typically every few wire spools.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
SIEMENS
SIEMENS 52PP2D2AB 30 mm Illuminated Push Button Red 24 V LED 1NO/1NC
$179.99
0.00216259BTC
In stock