We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue industrial welder unit with front control panel and side handle

Miller Enterprises

Miller Enterprises 907757 Multimatic 220 AC/DC Multiprocess Welder

SKU CH-1ERM-JC23Y MPN 907757

Multiprocess welder runs on 110V or 220V single-phase power and handles Flux-Cored, MIG, Stick, and TIG welding up to 230A

  • TypeTools
  • Multiprocess versatility covers Flux-Cored, MIG, Stick and TIG
  • Single-phase 110V or 220V input fits shop or home power
  • Up to 230A MIG output with 15%-40% duty cycle
  • AC/DC TIG with adjustable balance, frequency and pulsed arc
  • Welds steel, aluminium and stainless from 24 gauge to 3/8 inch

Multiprocess Welder for Steel and Aluminium

The Miller Multimatic 220 AC/DC handles Flux-Cored, MIG, Stick and TIG welding on single-phase 110V or 220V power. It suits professional workshops and advanced hobbyists working with steel, aluminium and stainless steel. The unit delivers up to 230A for MIG, 210A for TIG and 200A for Stick with a 15% to 40% duty cycle.

AC/DC Polarity with Advanced TIG Controls

Adjustable AC balance, frequency and pulsed TIG settings give finer arc control on aluminium and stainless steel. High-frequency or lift arc start options let the operator choose the ignition method that fits the joint. Open circuit voltage sits at 46V DC for stable arc initiation across the supported processes.

Output Range and Material Thickness Limits

Mild steel from 24 gauge up to 3/8 inch is within the machine’s comfortable range. Wire feed speed spans 60 to 60600 inches per minute for flux-cored and MIG work. The 15% to 40% duty cycle means extended high-amperage runs will require cooling pauses. Builders needing thicker plate penetration or continuous heavy-duty cycles should consider a higher-capacity unit.

Highlights

  • Multiprocess versatility covers Flux-Cored, MIG, Stick and TIG
  • Single-phase 110V or 220V input fits shop or home power
  • Up to 230A MIG output with 15%-40% duty cycle
  • AC/DC TIG with adjustable balance, frequency and pulsed arc
  • Welds steel, aluminium and stainless from 24 gauge to 3/8 inch

Specifications

BrandMILLER ELECTRIC
TypeTools

Questions about this item

How often will the contact tip and liner need changing when running flux-cored wire at the top 60600 inches per minute feed speed?

Contact tips and liners are consumables that wear faster at high wire speeds; plan to inspect them each spool change and replace when the arc becomes erratic or the wire feeds poorly.

Which duty-cycle limit will be reached first during a long 230 A MIG run on 220 V single-phase power?

The 40 % duty cycle at 230 A MIG output is the limiting factor; after roughly four minutes of continuous welding the unit must cool for six minutes before resuming.

How loud is the cooling fan and how hot does the case get when the machine runs all day at 210 A AC TIG with pulsed arc settings?

The built-in fan runs continuously under sustained load; expect noticeable airflow noise and a warm case, so keep ventilation clear and allow the 15–40 % duty-cycle pauses for cooling.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.