Miller Enterprises
Miller Enterprises 907382 Anti-Wear Guide 0.125 in
Anti-wear wire guide for 0.125 in aluminum, flux-cored or solid wire on Pipeworx 400 and Axcess feeders
- TypeTools
- Extends contact-tip life with hardened anti-wear guide
- Handles wire up to .125 in diameter for versatile feeding
- Compatible with Pipeworx 400 and multiple feeder series
- Supports flux-cored, MIG and aluminum wire types
- Fits models 907382, 907384, 951381, 951382
Miller Anti-Wear Guide 0.125 in
The Miller Enterprises 907382 anti-wear guide directs welding wire through the feeder assembly. It supports aluminium, flux-cored and solid wire types up to a maximum diameter of 0.125 in. The guide fits Pipeworx 400 welders and Axcess, D-74, PipePro and S-74 series feeders.
Sustained wire feeding
During extended flux-cored or MIG welding runs the guide maintains consistent wire alignment without binding. Its hardened contact surface resists the abrasive wear that occurs when wire travels continuously at production speeds. The component remains dimensionally stable throughout long shifts on Pipeworx 400 and compatible feeder models.
Wire diameter limit
The 0.125 in maximum wire diameter defines the practical upper bound for this guide. Larger diameters cannot pass through the bore and would damage the inlet if forced. Shops running heavier wire must select a different guide size matched to their feeder and process requirements.
Highlights
- Extends contact-tip life with hardened anti-wear guide
- Handles wire up to .125 in diameter for versatile feeding
- Compatible with Pipeworx 400 and multiple feeder series
- Supports flux-cored, MIG and aluminum wire types
- Fits models 907382, 907384, 951381, 951382
Specifications
| Brand | MILLER ELECTRIC |
|---|---|
| Type | Tools |
Questions about this item
Does the anti-wear guide generate noticeable heat or noise during continuous wire feeding on a Pipeworx 400?
The guide is a passive metal component with no moving parts or electronics, so it produces no heat or noise beyond normal wire friction.
Which wire feeder models must I already own for this 0.125 in guide to fit correctly?
Compatible feeders include Axcess Series, D-74 MPa Plus, D-74D, D-74S, PipePro Dual DX, PipePro Single, PipePro Single DX, S-64, S-74 MPa Plus, S-74D, and S-74S.
Will the guide work with an older S-74D feeder running flux-cored wire at the maximum 0.125 in diameter?
Yes, the S-74D is listed among supported feeders and the guide handles flux-cored, solid, and aluminum wire up to 0.125 in.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
SIEMENS
SIEMENS 52PP2D2AB 30 mm Illuminated Push Button Red 24 V LED 1NO/1NC
$179.99
0.00215826BTC
In stock