We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black vinyl gas hose coiled 12.5 ft length 3.8 m

Miller Enterprises

Miller Enterprises 40V75 Vinyl Gas Hose 12.5 Ft (3.8m)

SKU CH-JMMT-7JXBR

Vinyl gas hose for TIG welding, 12.5 ft length, fits Series 18 and compatible torches

  • TypeWelding Supplies
  • 5 ft vinyl hose reaches the workpiece easily
  • Compatible with Series 18 and PTW-18 torches
  • Works with Linde WP-18 and WP-18V models
  • Suited for TIG welding (GTAW) processes
  • Black vinyl construction resists typical shop wear

Miller Enterprises 40V75 Vinyl Gas Hose

This 12.5 ft vinyl gas hose connects to Miller Series 18 and compatible Linde TIG torches. It suits welders running GTAW processes who need a replacement or spare line. The black hose carries shielding gas from the regulator to the torch. It is not for MIG or stick setups that use different hose fittings.

Practical limits of the vinyl hose

Vinyl tubing handles standard argon and argon-helium mixes at typical TIG flow rates. It is not rated for high-pressure oxygen or fuel-gas service. The 12.5 ft length fixes the working radius; longer runs need a joined assembly. California Proposition 65 warnings apply because the material contains listed chemicals.

Installation and common issues

Push the hose onto the torch and regulator barbs, then secure with appropriate clamps. A frequent error is using the wrong clamp size, which causes leaks at the connection. Another issue is kinking the vinyl during tight bends, restricting gas flow. Inspect the tube for cracks before each use.

Highlights

  • 5 ft vinyl hose reaches the workpiece easily
  • Compatible with Series 18 and PTW-18 torches
  • Works with Linde WP-18 and WP-18V models
  • Suited for TIG welding (GTAW) processes
  • Black vinyl construction resists typical shop wear

Specifications

BrandMILLER ELECTRIC
TypeWelding Supplies

Questions about this item

What length of vinyl gas hose does the 40V75 provide for my TIG setup?

The hose measures 12.5 ft (3.8 m) end to end, giving enough reach for most bench or portable TIG workstations.

How does the 12.5 ft length affect gas flow when I am running a TIG torch at typical amperage?

At 12.5 ft the vinyl tube keeps pressure drop low enough for steady shielding gas coverage on Series 18, PTW-18, W-350 and W-400 torches.

Which torch series and models does the 40V75 vinyl hose connect to without adapters?

It fits Series 18, PTW-18, W-350 and W-400 torches, including models 18, 18-90, 18HP, 18P, 18V, PTW-18, WP-18, WP-18SC and WP-18V.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.