We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White PTFE welding liner coil for Miller XR-Aluma-Pro spoolgun

Miller Enterprises

Miller Enterprises 300001 PTFE Liner .045-.062 in

SKU CH-6Q8R-AJNJF MPN 300001

PTFE liner guides .045 to .062 in aluminium wire in Miller XR-Aluma-Pro spool guns for smooth MIG welding

  • TypeWelding Parts & Supplies
  • PTFE liner feeds aluminium wire smoothly
  • Compatible with XR-Aluma-Pro spoolgun series
  • Handles wire diameters from .045 to .062 in
  • Fits models 300001, 300003, 300004 and 301568-301573
  • Replaces Miller Electric liner 229431

PTFE Liner for XR-Aluma-Pro Spoolguns

This PTFE liner fits Miller XR-Aluma-Pro and compatible Series spoolguns including models 300001, 300003, 300004, 301568, 301569, 301570, 301571, 301572 and 301573. It supports wire diameters from .045 to .062 in for MIG (GMAW) processes. The liner carries manufacturer model number 229431 and is supplied new.

Suitable for MIG wire feed setups

Welders running .045 to .062 in aluminium or other soft wire through an XR-Aluma-Pro or listed Series spoolgun will find this liner matches the specified bore range. Shops using different spoolgun models, smaller wire below .045 in, or larger wire above .062 in should select a liner rated for those diameters.

Bore range .045 to .062 in

The liner accepts wire from .045 in minimum up to .062 in maximum, which is the single dimension that determines compatibility with your spoolgun and wire spool. Verify your wire size before ordering.

Highlights

  • PTFE liner feeds aluminium wire smoothly
  • Compatible with XR-Aluma-Pro spoolgun series
  • Handles wire diameters from .045 to .062 in
  • Fits models 300001, 300003, 300004 and 301568-301573
  • Replaces Miller Electric liner 229431

Specifications

BrandMILLER ELECTRIC
TypeWelding Parts & Supplies

Questions about this item

What wire diameters does the PTFE liner .045-.062 in support for MIG welding?

The liner feeds wires from .045 in up to .062 in diameter, covering the full range quoted for the XR-Aluma-Pro spoolgun series.

Which spoolgun models accept liner 229431 without modification?

It fits the XR-Aluma-Pro and the Series Spoolgun models 300001, 300003, 300004, 301568, 301569, 301570, 301571, 301572 and 301573.

What is the common installation mistake when replacing this PTFE liner?

Users often forget to trim the new liner to the exact torch length before seating it, causing wire feed drag or bird-nesting.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.