We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Miller Enterprises 285033 MIG gun, 10 ft cable, curved handle, rotatable 60° neck

Miller Enterprises

Miller Enterprises 285033 welding gun 10ft .030-.035 wire 100A 60° rotatable neck

SKU CH-68JY-YDNX1 MPN 285033

Air-cooled MIG gun with 10 ft cable, .030–.035 in wire capacity, 100 A rating and 60° rotatable neck

  • TypeAir Cooled
  • 10 ft cable reaches across the workbench
  • Air-cooled design runs at 100 A continuous duty
  • Rotatable 60° neck angles into tight joints
  • Accepts .030-.035 in flux-cored and solid wire
  • Curved handle with standard trigger reduces fatigue

Air-Cooled MIG Gun, 10 ft Cable

This Miller Enterprises 285033 welding gun is an air-cooled MIG torch rated at 100 A with a 100 percent duty cycle. It accepts 0.030 to 0.035 in flux-cored or solid wire and features a 60-degree rotatable neck. The 10 ft cable connects to Hobart rear fittings and the curved handle uses a standard trigger. It suits MIG and flux-cored welding processes.

Welders Needing Rotatable Neck and Hobart Fit

This gun suits operators who need a 100 A air-cooled torch with a rotatable neck for awkward joint angles. The Hobart-specific rear connection means it fits compatible feeders without adapters. Buyers whose machines use a different rear connection type should look at other models. It is not for applications exceeding the 0.035 in maximum wire diameter or 100 A rating.

0.035 in Maximum Wire Diameter

The 0.035 in maximum wire diameter is the key specification that decides compatibility. If your procedure requires larger wire, this gun cannot feed it. The 100 A continuous rating and 10 ft cable length are fixed by the design. Verify your feeder accepts the Hobart rear connection before purchasing.

Highlights

  • 10 ft cable reaches across the workbench
  • Air-cooled design runs at 100 A continuous duty
  • Rotatable 60° neck angles into tight joints
  • Accepts .030-.035 in flux-cored and solid wire
  • Curved handle with standard trigger reduces fatigue

Specifications

BrandMiller Electric
TypeAir Cooled

Questions about this item

Does the air-cooled design stay manageable when the gun runs at its 100 A, 100 % duty-cycle rating all day?

The gun is rated for 100 A at a 100 % duty cycle with air cooling, so it is built to handle continuous operation at that level without overheating.

Which wire feeder rear connection does the 10 ft cable need to fit?

The cable terminates in a Hobart-style rear connection, so your feeder must accept that interface.

Will the 60° rotatable neck and M-Series tips work with the consumables I already use on my older Hobart gun?

The neck rotates 60° and uses M-Series tips, matching the standard consumable series found on many Hobart-compatible guns.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.